APC by Schneider Electric Switched 48-Outlet PDU - AP8967

APC by Schneider Electric Switched 48-Outlet PDU - AP8967

$4,125.00
Availability:
Out of stock
Product type:

APC by Schneider Electric Switched 48-Outlet PDU

UPC 0731304330905
Switched - IEC 60309 3P+PE 60A - 42 x IEC 60320 C13, 6 x IEC 60320 C19 - 230 V AC - 17.20 kW - 0U - Rack-mountable - Tower
General Information
Manufacturer: Schneider Electric SA
Manufacturer Part Number: AP8967
Manufacturer Website Address: http://www.schneider-electric.com
Brand Name: APC by Schneider Electric
Product Series: Switched
Product Name: Switched 48-Outlet PDU
Marketing Information:

Rack PDU 2G, Switched, ZeroU, 17.2kW, 208V, (42) C13, (6) C19

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Product Type: PDU
Technical Information
PDU Type: Switched
Plug/Connector Type: IEC 60309 3P+PE 60A
Plug/Connector Detail: 1 x IEC 60309 3P+PE 60A
Receptacle Type:
  • IEC 60320 C13
  • IEC 60320 C19
Receptacle Detail:
  • 42 x IEC 60320 C13
  • 6 x IEC 60320 C19
Protection Type: Overload Protection
Power Description
Input Voltage: 230 V AC
Output Voltage: 208 V AC
Power Rating (Watt): 17.20 kW
Input Current: 60 A
Physical Characteristics
Mount Type: Rack-mountable
Form Factor: Tower
Rack Height: 0U
Height: 72" (1828.80 mm)
Width: 2.20" (55.88 mm)
Depth: 2" (50.80 mm)
Weight (Approximate): 15.88 kg
Miscellaneous
Package Contents:
  • Switched 48-Outlet PDU
  • Installation guide
  • Rack mounting brackets
  • Safety guide
  • Serial configuration cable
  • Environmentally Friendly: Yes
    Environmental Compliance:
    • Restriction of Hazardous Substances (RoHS)
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    Warranty
    Limited Warranty: 2 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    APC by Schneider Electric Switched 48-Outlet PDU

    UPC 0731304330905
    Switched - IEC 60309 3P+PE 60A - 42 x IEC 60320 C13, 6 x IEC 60320 C19 - 230 V AC - 17.20 kW - 0U - Rack-mountable - Tower
    General Information
    Manufacturer: Schneider Electric SA
    Manufacturer Part Number: AP8967
    Manufacturer Website Address: http://www.schneider-electric.com
    Brand Name: APC by Schneider Electric
    Product Series: Switched
    Product Name: Switched 48-Outlet PDU
    Marketing Information:

    Rack PDU 2G, Switched, ZeroU, 17.2kW, 208V, (42) C13, (6) C19

    APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

    Product Type: PDU
    Technical Information
    PDU Type: Switched
    Plug/Connector Type: IEC 60309 3P+PE 60A
    Plug/Connector Detail: 1 x IEC 60309 3P+PE 60A
    Receptacle Type:
    • IEC 60320 C13
    • IEC 60320 C19
    Receptacle Detail:
    • 42 x IEC 60320 C13
    • 6 x IEC 60320 C19
    Protection Type: Overload Protection
    Power Description
    Input Voltage: 230 V AC
    Output Voltage: 208 V AC
    Power Rating (Watt): 17.20 kW
    Input Current: 60 A
    Physical Characteristics
    Mount Type: Rack-mountable
    Form Factor: Tower
    Rack Height: 0U
    Height: 72" (1828.80 mm)
    Width: 2.20" (55.88 mm)
    Depth: 2" (50.80 mm)
    Weight (Approximate): 15.88 kg
    Miscellaneous
    Package Contents:
  • Switched 48-Outlet PDU
  • Installation guide
  • Rack mounting brackets
  • Safety guide
  • Serial configuration cable
  • Environmentally Friendly: Yes
    Environmental Compliance:
    • Restriction of Hazardous Substances (RoHS)
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    Warranty
    Limited Warranty: 2 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.