APC by Schneider Electric NetShelter 48-Outlets PDU - APDU10250SM

APC by Schneider Electric NetShelter 48-Outlets PDU - APDU10250SM

$4,175.00
Availability:
Out of stock
Product type:

APC by Schneider Electric NetShelter 48-Outlets PDU

UPC 0731304439707
Switched - IEC 60309 20A 3P+N+PE - 24 x IEC 60320 C13/C15, 24 x IEC 60320 C13/C15/C19/C21 - 415 V, 480 V - 5.9 ft Cord Length - 0U - Rack - TAA Compliant
General Information
Manufacturer: Schneider Electric SA
Manufacturer Part Number: APDU10250SM
Manufacturer Website Address: http://www.schneider-electric.com
Brand Name: APC by Schneider Electric
Product Line: NetShelter
Product Name: NetShelter 48-Outlets PDU
Marketing Information: APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Switched outlets to turn outlets on or off remotely. Outlet and PDU level power metering for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparalleled deployment flexibility. Maximum outlet density with 48 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.
Product Type: PDU
Technical Information
PDU Type: Switched
Phase: Three Phase
Plug/Connector Type: IEC 60309 20A 3P+N+PE
Receptacle Type:
  • IEC 60320 C13/C15/C19/C21
  • IEC 60320 C13/C15
Receptacle Detail:
  • 24 x IEC 60320 C13/C15
  • 24 x IEC 60320 C13/C15/C19/C21
Power Description
Input Voltage:
  • 415 V
  • 480 V
Input Voltage Range:
  • 200 V AC - 240 V AC
  • 346 V AC - 415 V AC
Output Voltage: 240 V AC
Power Rating (VA): 11.50 kVA
Power Rating (Watt): 11.50 kW
Input Current: 20 A
Physical Characteristics
Color Family: Black
Product Color: Black
Form Factor: Rack
Rack Height: 0U
Cord Length: 5.9 ft
Height: 58.66" (1490 mm)
Width: 2.20" (56 mm)
Depth: 2.95" (75 mm)
Weight (Approximate): 7.70 kg
Miscellaneous
Certifications & Standards: TAA compliance|UKCA
Green Premium: Yes
RoHS Exemption Information: https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=APDU10250SM_ROHS_DECLARATION&p_FileName=APDU10250SMKIT_ROHS_DECLARATION_US.pdf
REACH Declaration URL: https://checkaproduct.se.com/DistantRequestDispatcher.aspx?action=exportPdfReach&pid=552062991&lang=en-us
EU RoHS Declaration URL: https://checkaproduct.se.com/DistantRequestDispatcher.aspx?action=export&pid=552062991&lang=en-us
Environmental Profile Availability: https://download.schneider-electric.com/files?p_enDocType=Environmental+Disclosure&p_Doc_Ref=ENVPEP1612033_EN
End of Life Manual Availability: https://download.schneider-electric.com/files?p_enDocType=Circularity+Profile&p_Doc_Ref=ENVEOLI1612033_EN
WEEE Statement: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Country of Origin: India
TAA Compliant: Yes
Environmentally Friendly: Yes
Environmental Compliance:
  • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
  • China Restriction of Hazardous Substances (China RoHS)
  • Restriction of Hazardous Substances (RoHS)
  • Waste Electrical and Electronic Equipment Directive (WEEE)
Warranty
Limited Warranty: 3 Year
Additional Warranty Information: 3 years repair or replace
Stay ON Forever

Protects Your Device From Power Outage & Blackout

Express Shipping

Canada Wide Discounted Shipping

OEM Standard

Long Lasting Powerful Batteries with 1 year warranty

Hassle Free Returns

Request RMA and Get Refunded Within 3 Days

Technical Support

Get Free Technical Support & Installation Guide

Technical Support

Get Free Technical Support & Installation Guide

APC by Schneider Electric NetShelter 48-Outlets PDU

UPC 0731304439707
Switched - IEC 60309 20A 3P+N+PE - 24 x IEC 60320 C13/C15, 24 x IEC 60320 C13/C15/C19/C21 - 415 V, 480 V - 5.9 ft Cord Length - 0U - Rack - TAA Compliant
General Information
Manufacturer: Schneider Electric SA
Manufacturer Part Number: APDU10250SM
Manufacturer Website Address: http://www.schneider-electric.com
Brand Name: APC by Schneider Electric
Product Line: NetShelter
Product Name: NetShelter 48-Outlets PDU
Marketing Information: APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Switched outlets to turn outlets on or off remotely. Outlet and PDU level power metering for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparalleled deployment flexibility. Maximum outlet density with 48 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.
Product Type: PDU
Technical Information
PDU Type: Switched
Phase: Three Phase
Plug/Connector Type: IEC 60309 20A 3P+N+PE
Receptacle Type:
  • IEC 60320 C13/C15/C19/C21
  • IEC 60320 C13/C15
Receptacle Detail:
  • 24 x IEC 60320 C13/C15
  • 24 x IEC 60320 C13/C15/C19/C21
Power Description
Input Voltage:
  • 415 V
  • 480 V
Input Voltage Range:
  • 200 V AC - 240 V AC
  • 346 V AC - 415 V AC
Output Voltage: 240 V AC
Power Rating (VA): 11.50 kVA
Power Rating (Watt): 11.50 kW
Input Current: 20 A
Physical Characteristics
Color Family: Black
Product Color: Black
Form Factor: Rack
Rack Height: 0U
Cord Length: 5.9 ft
Height: 58.66" (1490 mm)
Width: 2.20" (56 mm)
Depth: 2.95" (75 mm)
Weight (Approximate): 7.70 kg
Miscellaneous
Certifications & Standards: TAA compliance|UKCA
Green Premium: Yes
RoHS Exemption Information: https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=APDU10250SM_ROHS_DECLARATION&p_FileName=APDU10250SMKIT_ROHS_DECLARATION_US.pdf
REACH Declaration URL: https://checkaproduct.se.com/DistantRequestDispatcher.aspx?action=exportPdfReach&pid=552062991&lang=en-us
EU RoHS Declaration URL: https://checkaproduct.se.com/DistantRequestDispatcher.aspx?action=export&pid=552062991&lang=en-us
Environmental Profile Availability: https://download.schneider-electric.com/files?p_enDocType=Environmental+Disclosure&p_Doc_Ref=ENVPEP1612033_EN
End of Life Manual Availability: https://download.schneider-electric.com/files?p_enDocType=Circularity+Profile&p_Doc_Ref=ENVEOLI1612033_EN
WEEE Statement: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Country of Origin: India
TAA Compliant: Yes
Environmentally Friendly: Yes
Environmental Compliance:
  • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
  • China Restriction of Hazardous Substances (China RoHS)
  • Restriction of Hazardous Substances (RoHS)
  • Waste Electrical and Electronic Equipment Directive (WEEE)
Warranty
Limited Warranty: 3 Year
Additional Warranty Information: 3 years repair or replace
Here is the Manual Guide

ORDER PROCESSING

We ship from Toronto to Worldwide.
We process orders within 1-2 business days (excluding weekends and holidays).
Pre-ordered items are processed within 2-3 business days of arrival in stock.

Successfully placed orders will receive an e-mail confirmation with the order details.
If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.