Tripp Lite by Eaton B110-SP-CAT Surge Suppressor/Protector - B110-SP-CAT

Tripp Lite by Eaton B110-SP-CAT Surge Suppressor/Protector - B110-SP-CAT

$106.03
Availability:
Out of stock

Tripp Lite by Eaton B110-SP-CAT Surge Suppressor/Protector

UPC 0037332217882
Gigabit Ethernet - 1 ft - TAA Compliant
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: B110-SP-CAT
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Model: B110-SP-CAT
Product Name: B110-SP-CAT Surge Suppressor/Protector
Marketing Information:

In-Line Surge Protector Keeps Your 10G Ethernet Network Equipment Safe

Ideal for home/corporate security systems, home theaters, trade shows and other digital signage applications, the B110-SP-CAT protects connected network equipment from damage caused by lightning, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network device using Cat5/5e/6 cables, such as Tripp Lite's N001-Series snagless patch cables (sold separately). Note: two B110-SP-CAT surge protectors are required to protect both source and device.

Your Last Defense Against Intruding Voltage Spikes

Solid-state silicon-avalanche diode technology features low clamping voltage, providing superior protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. The B110-SP-CAT meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact) and IEC 61000-4-5 (Lightning) 2kA (8/20µs), 6kV (8/20µs).

Ready to Use Right from the Package, So You Can Plug and Play Immediately

This in-line surge protector supports data transmission speeds up to 10 Gbps and 4K resolutions up to 3840 x 2160 at 60Hz (HDBaseT) without signal degradation. No software, drivers or external power supply is required. The compact metal housing is designed to endure in applications where static discharge is likely to occur. Mounting hardware is included for convenient installation where needed. Be sure the distance between the B110-SP-CAT and the equipment it is protecting is no more than 300 feet.

TAA-Compliant for GSA Schedule Purchases

The B110-SP-CAT is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

More from the Manufacturer

Product Type: Surge Suppressor/Protector
Technical Information
Dataline Protection: Gigabit Ethernet
Physical Characteristics
Power Cord/Cable Length: 1 ft
Height: 26.38" (670 mm)
Width: 34.25" (870 mm)
Depth: 10.63" (270 mm)
Weight (Approximate): 130 g
Miscellaneous
Package Contents:
  • B110-SP-CAT Surge Suppressor/Protector
  • Grounding Wire, 1 ft.
  • 4 x Mounting Screws
  • 4 x Screw Anchors
  • Grounding Wire Screw
  • Quick Start Guide
Country of Origin: China
TAA Compliant: Yes
Environmentally Friendly: Yes
Environmental Compliance:
  • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
  • Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 2 Year
Stay ON Forever

Protects Your Device From Power Outage & Blackout

Express Shipping

Canada Wide Discounted Shipping

OEM Standard

Long Lasting Powerful Batteries with 1 year warranty

Hassle Free Returns

Request RMA and Get Refunded Within 3 Days

Technical Support

Get Free Technical Support & Installation Guide

Technical Support

Get Free Technical Support & Installation Guide

Tripp Lite by Eaton B110-SP-CAT Surge Suppressor/Protector

UPC 0037332217882
Gigabit Ethernet - 1 ft - TAA Compliant
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: B110-SP-CAT
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Model: B110-SP-CAT
Product Name: B110-SP-CAT Surge Suppressor/Protector
Marketing Information:

In-Line Surge Protector Keeps Your 10G Ethernet Network Equipment Safe

Ideal for home/corporate security systems, home theaters, trade shows and other digital signage applications, the B110-SP-CAT protects connected network equipment from damage caused by lightning, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network device using Cat5/5e/6 cables, such as Tripp Lite's N001-Series snagless patch cables (sold separately). Note: two B110-SP-CAT surge protectors are required to protect both source and device.

Your Last Defense Against Intruding Voltage Spikes

Solid-state silicon-avalanche diode technology features low clamping voltage, providing superior protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. The B110-SP-CAT meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact) and IEC 61000-4-5 (Lightning) 2kA (8/20µs), 6kV (8/20µs).

Ready to Use Right from the Package, So You Can Plug and Play Immediately

This in-line surge protector supports data transmission speeds up to 10 Gbps and 4K resolutions up to 3840 x 2160 at 60Hz (HDBaseT) without signal degradation. No software, drivers or external power supply is required. The compact metal housing is designed to endure in applications where static discharge is likely to occur. Mounting hardware is included for convenient installation where needed. Be sure the distance between the B110-SP-CAT and the equipment it is protecting is no more than 300 feet.

TAA-Compliant for GSA Schedule Purchases

The B110-SP-CAT is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

More from the Manufacturer

Product Type: Surge Suppressor/Protector
Technical Information
Dataline Protection: Gigabit Ethernet
Physical Characteristics
Power Cord/Cable Length: 1 ft
Height: 26.38" (670 mm)
Width: 34.25" (870 mm)
Depth: 10.63" (270 mm)
Weight (Approximate): 130 g
Miscellaneous
Package Contents:
  • B110-SP-CAT Surge Suppressor/Protector
  • Grounding Wire, 1 ft.
  • 4 x Mounting Screws
  • 4 x Screw Anchors
  • Grounding Wire Screw
  • Quick Start Guide
Country of Origin: China
TAA Compliant: Yes
Environmentally Friendly: Yes
Environmental Compliance:
  • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
  • Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 2 Year
Here is the Manual Guide

ORDER PROCESSING

We ship from Toronto to Worldwide.
We process orders within 1-2 business days (excluding weekends and holidays).
Pre-ordered items are processed within 2-3 business days of arrival in stock.

Successfully placed orders will receive an e-mail confirmation with the order details.
If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.