Tripp Lite PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet - PDUMH20AT

Tripp Lite PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet - PDUMH20AT

$1,116.54
Availability:
Out of stock
Product type:

Tripp Lite PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet

UPC 0037332126665
16 x NEMA 5-15/20R - 2.4kVA - 1U Rack-mountable
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: PDUMH20AT
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Model: PDUMH20ATNET
Product Name: PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet
Marketing Information:

Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

Product Type: PDU
Technical Information
Plug/Connector Type: NEMA L5-20P
Plug/Connector Detail: 2 x NEMA L5-20P
Receptacle Type: NEMA 5-15/20R
Receptacle Detail: 16 x NEMA 5-15/20R
Power Description
Input Voltage: 120 V AC
Output Voltage: 120 V AC
Power Rating (VA): 2.40 kVA
Management
Management:
  • Optional Automatic Transfer Switch (ATS) function enables setup for hot-swappable UPS maintenance bypass
  • Dual UPS protection or dual AC input redundancy for critical single-corded network hardware
  • Slot for optional SNMPWEBCARD accessory to enable remote individual outlet control over IP
Physical Characteristics
Mount Type: Rack-mountable
Rack Height: 1U
Number of Cord/Cable: 2
Height: 1.75" (44.45 mm)
Width: 17.50" (444.50 mm)
Depth: 14.50" (368.30 mm)
Weight (Approximate): 5.53 kg
Miscellaneous
Package Contents:
  • PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet
  • PDU with attached L5-20P input power cord
  • Detachable C19 to NEMA L5-20P 12 ft/3.6m power cord for optional secondary input
  • Two NEMA L5-20R to NEMA 5-20P plug adapters
  • User manual with warranty information
Additional Information: TAA Compliant
Certifications & Standards:
  • 60950
  • Class A
  • RoHS Complaint
Country of Origin: Taiwan
TAA Compliant: Yes
Environmentally Friendly: Yes
Warranty
Limited Warranty: 2 Year
Stay ON Forever

Protects Your Device From Power Outage & Blackout

Express Shipping

Canada Wide Discounted Shipping

OEM Standard

Long Lasting Powerful Batteries with 1 year warranty

Hassle Free Returns

Request RMA and Get Refunded Within 3 Days

Technical Support

Get Free Technical Support & Installation Guide

Technical Support

Get Free Technical Support & Installation Guide

Tripp Lite PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet

UPC 0037332126665
16 x NEMA 5-15/20R - 2.4kVA - 1U Rack-mountable
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: PDUMH20AT
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Model: PDUMH20ATNET
Product Name: PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet
Marketing Information:

Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

Product Type: PDU
Technical Information
Plug/Connector Type: NEMA L5-20P
Plug/Connector Detail: 2 x NEMA L5-20P
Receptacle Type: NEMA 5-15/20R
Receptacle Detail: 16 x NEMA 5-15/20R
Power Description
Input Voltage: 120 V AC
Output Voltage: 120 V AC
Power Rating (VA): 2.40 kVA
Management
Management:
  • Optional Automatic Transfer Switch (ATS) function enables setup for hot-swappable UPS maintenance bypass
  • Dual UPS protection or dual AC input redundancy for critical single-corded network hardware
  • Slot for optional SNMPWEBCARD accessory to enable remote individual outlet control over IP
Physical Characteristics
Mount Type: Rack-mountable
Rack Height: 1U
Number of Cord/Cable: 2
Height: 1.75" (44.45 mm)
Width: 17.50" (444.50 mm)
Depth: 14.50" (368.30 mm)
Weight (Approximate): 5.53 kg
Miscellaneous
Package Contents:
  • PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet
  • PDU with attached L5-20P input power cord
  • Detachable C19 to NEMA L5-20P 12 ft/3.6m power cord for optional secondary input
  • Two NEMA L5-20R to NEMA 5-20P plug adapters
  • User manual with warranty information
Additional Information: TAA Compliant
Certifications & Standards:
  • 60950
  • Class A
  • RoHS Complaint
Country of Origin: Taiwan
TAA Compliant: Yes
Environmentally Friendly: Yes
Warranty
Limited Warranty: 2 Year
Here is the Manual Guide

ORDER PROCESSING

We ship from Toronto to Worldwide.
We process orders within 1-2 business days (excluding weekends and holidays).
Pre-ordered items are processed within 2-3 business days of arrival in stock.

Successfully placed orders will receive an e-mail confirmation with the order details.
If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.