Tripp Lite by Eaton PINV2000 Power Inverter - PINV2000

Tripp Lite by Eaton PINV2000 Power Inverter - PINV2000

$791.86
Availability:
Out of stock
Product type:

Tripp Lite by Eaton PINV2000 Power Inverter

UPC 0037332225092
Input Voltage: 12 V DC - Output Voltage: 115 V AC, 120 V AC, 5 V DC
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: PINV2000
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Model: PINV2000
Product Name: PINV2000 Power Inverter
Marketing Information:

Mobile Power Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle

You don't have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 2000W mobile inverter converts 12V DC power from your car, truck, fleet vehicle, boat or RV's battery into standard 120V AC power. Just connect the included battery cables between the inverter's DC input terminals and the positive and negative terminals on your vehicle's battery.

Dual GFCI-Protected AC Outlets Provide Portable Power for Your Mobile Applications

This compact power inverter provides a modified sine wave for use at remote locations, such as campgrounds, construction sites and mobile offices. Two NEMA 5-15/20R outlets deliver a continuous output of 2000 watts and a peak output of 4000 watts. That's plenty to operate a variety of appliances and power tools, such as low-power lights, camping accessories, battery rechargers for small battery-operated power tools, and mobile office equipment. Both outlets have OSHA-compliant self-testing GFCI (Ground-Fault Circuit Interrupter) protection to shield you, your vehicle and the connected equipment from electrical shock hazards.

USB Charging Port Keeps Your Devices at Full Strength

The 5V 2A USB port remains active even when the inverter's on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop, MP3 player or GPS unit without draining too much power from the vehicle's battery.

Includes the Latest Safety Features to Protect Your Equipment and Battery

An on/off/remote switch offers one-touch control over both AC outlets. If the power input from the vehicle's battery drops below 10 volts or exceeds 16 volts, the mobile power inverter will automatically shut down. Green and red LEDs indicate normal and improper operation. Two load-controlled fans begin cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions. The self-testing GFCI offers a protection status LED that alerts you when the GFCI protection is still available.

Remote Control Panel Allows Power Control from 20 ft. Away

A remote panel is included to extend on/off control over AC power output from a remote location. The wired panel connects to the PINV2000's RJ11 port and can be permanently installed inside your vehicle with user-supplied hardware. This allows you to mount the inverter somewhere out of sight, like inside a compartment or cabinet, and be able to operate it from your vehicle's dashboard. The panel's green LED confirms the inverter is powered on.

Brackets Included for Permanent Mounting

The compact mobile power inverter's durable aluminum housing is designed to withstand the rigors of road trips, campouts, business trips and family vacations. Use the built-in mounting brackets and your own hardware to install the inverter permanently in a horizontal position.

More from the Manufacturer

Product Type: Power Inverter
Technical Information
Plug/Connector Type: Terminal Block
Receptacles:
  • 2 x NEMA 5-15/20R
  • 1 x USB
Protection Type: Overload Protection
Power Description
Input Voltage: 12 V DC
Input Voltage Range: 10 V DC - 16 V DC
Output Voltage:
  • 115 V AC
  • 120 V AC
  • 5 V DC
Maximum Frequency: 60 Hz
Peak Power Load: 4 kW
Continuous Power Load: 2 kW
Waveform Type: Pulse-width Modulated Sine Wave
Physical Characteristics
Color Family: Black
Product Color: Black
Height: 3.58" (90.93 mm)
Width: 9.69" (246.13 mm)
Depth: 10.59" (268.99 mm)
Weight (Approximate): 3.27 kg
Miscellaneous
Additional Information:
  • TVSS Grounding
  • Form factors supported: Horizontal floor, Wall-Mount
Package Contents:
  • PINV2000 Power Inverter
  • Battery Cable, Red/Black, 3 ft.
  • Grounding Cable, 3 ft.
  • PINVRM Wired Remote Panel w/20 ft. Cable
  • Owner's Manual
Certifications & Standards:
  • UL458:2015 6th Edition
  • CAN/CSA-C22.2 NO.107.1:2016 4th Edition
Country of Origin: China
Environmentally Friendly: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 2 Year
Stay ON Forever

Protects Your Device From Power Outage & Blackout

Express Shipping

Canada Wide Discounted Shipping

OEM Standard

Long Lasting Powerful Batteries with 1 year warranty

Hassle Free Returns

Request RMA and Get Refunded Within 3 Days

Technical Support

Get Free Technical Support & Installation Guide

Technical Support

Get Free Technical Support & Installation Guide

Tripp Lite by Eaton PINV2000 Power Inverter

UPC 0037332225092
Input Voltage: 12 V DC - Output Voltage: 115 V AC, 120 V AC, 5 V DC
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: PINV2000
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Model: PINV2000
Product Name: PINV2000 Power Inverter
Marketing Information:

Mobile Power Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle

You don't have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 2000W mobile inverter converts 12V DC power from your car, truck, fleet vehicle, boat or RV's battery into standard 120V AC power. Just connect the included battery cables between the inverter's DC input terminals and the positive and negative terminals on your vehicle's battery.

Dual GFCI-Protected AC Outlets Provide Portable Power for Your Mobile Applications

This compact power inverter provides a modified sine wave for use at remote locations, such as campgrounds, construction sites and mobile offices. Two NEMA 5-15/20R outlets deliver a continuous output of 2000 watts and a peak output of 4000 watts. That's plenty to operate a variety of appliances and power tools, such as low-power lights, camping accessories, battery rechargers for small battery-operated power tools, and mobile office equipment. Both outlets have OSHA-compliant self-testing GFCI (Ground-Fault Circuit Interrupter) protection to shield you, your vehicle and the connected equipment from electrical shock hazards.

USB Charging Port Keeps Your Devices at Full Strength

The 5V 2A USB port remains active even when the inverter's on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop, MP3 player or GPS unit without draining too much power from the vehicle's battery.

Includes the Latest Safety Features to Protect Your Equipment and Battery

An on/off/remote switch offers one-touch control over both AC outlets. If the power input from the vehicle's battery drops below 10 volts or exceeds 16 volts, the mobile power inverter will automatically shut down. Green and red LEDs indicate normal and improper operation. Two load-controlled fans begin cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions. The self-testing GFCI offers a protection status LED that alerts you when the GFCI protection is still available.

Remote Control Panel Allows Power Control from 20 ft. Away

A remote panel is included to extend on/off control over AC power output from a remote location. The wired panel connects to the PINV2000's RJ11 port and can be permanently installed inside your vehicle with user-supplied hardware. This allows you to mount the inverter somewhere out of sight, like inside a compartment or cabinet, and be able to operate it from your vehicle's dashboard. The panel's green LED confirms the inverter is powered on.

Brackets Included for Permanent Mounting

The compact mobile power inverter's durable aluminum housing is designed to withstand the rigors of road trips, campouts, business trips and family vacations. Use the built-in mounting brackets and your own hardware to install the inverter permanently in a horizontal position.

More from the Manufacturer

Product Type: Power Inverter
Technical Information
Plug/Connector Type: Terminal Block
Receptacles:
  • 2 x NEMA 5-15/20R
  • 1 x USB
Protection Type: Overload Protection
Power Description
Input Voltage: 12 V DC
Input Voltage Range: 10 V DC - 16 V DC
Output Voltage:
  • 115 V AC
  • 120 V AC
  • 5 V DC
Maximum Frequency: 60 Hz
Peak Power Load: 4 kW
Continuous Power Load: 2 kW
Waveform Type: Pulse-width Modulated Sine Wave
Physical Characteristics
Color Family: Black
Product Color: Black
Height: 3.58" (90.93 mm)
Width: 9.69" (246.13 mm)
Depth: 10.59" (268.99 mm)
Weight (Approximate): 3.27 kg
Miscellaneous
Additional Information:
  • TVSS Grounding
  • Form factors supported: Horizontal floor, Wall-Mount
Package Contents:
  • PINV2000 Power Inverter
  • Battery Cable, Red/Black, 3 ft.
  • Grounding Cable, 3 ft.
  • PINVRM Wired Remote Panel w/20 ft. Cable
  • Owner's Manual
Certifications & Standards:
  • UL458:2015 6th Edition
  • CAN/CSA-C22.2 NO.107.1:2016 4th Edition
Country of Origin: China
Environmentally Friendly: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 2 Year
Here is the Manual Guide

ORDER PROCESSING

We ship from Toronto to Worldwide.
We process orders within 1-2 business days (excluding weekends and holidays).
Pre-ordered items are processed within 2-3 business days of arrival in stock.

Successfully placed orders will receive an e-mail confirmation with the order details.
If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.