Tripp Lite by Eaton SmartPro 1500RM2U UPS - SMART1500RM2U

Tripp Lite by Eaton SmartPro 1500RM2U UPS - SMART1500RM2U

$1,931.07
Availability:
In stock

Tripp Lite by Eaton SmartPro 1500RM2U UPS

UPC 0037332119209
2U Rack-mountable - 4 Hour Recharge - 4.50 Minute Stand-by - 110 V AC Input - 120 V AC Output - USB - 8 x NEMA 5-15R - SNMP/Webcard
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: SMART1500RM2U
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Line: SmartPro
Product Name: SmartPro 1500RM2U UPS
Marketing Information:

Protects Mission-Critical Rack-Mounted Equipment

  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload, low battery and fault conditions
  • 8 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 0.9 power factor rating
  • 570-joule surge suppression rating


Reliable Battery Backup

  • Supports half load up to 13 min. and full load up to 4.5 min.
  • Internal batteries designed for hot-swap field replacement
  • 95% line-power efficiency rating saves money in energy costs


2 Load Banks with Switchable Outlets

  • Can control 4 outlets remotely to reboot equipment or shed nonessential loads


Automatic Voltage Regulation (AVR)

  • Maintains 120V nominal output over input range of 83V-147V without using battery power


EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance


Interactive LCD Screen

  • Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
  • Rotates for easy viewing in rack-mount or tower configurations


Network Management Cards

  • Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD


Communications Ports

  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from
  • EPO">www.tripplite.com/poweralert port supports emergency shutdown in large facilities

  • EPO">
    Versatile Installation Options

  • EPO">
    • Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
    • Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
    • Mounts in upright tower position with optional 2-9USTAND accessory
  • EPO">
Packaged Quantity: 1 Each
Product Type: Line-interactive UPS
Technical Information
Plug/Connector Type: NEMA 5-15P
Receptacle Type: NEMA 5-15R
Receptacle Detail: 8 x NEMA 5-15R
Overload Protection: Yes
Emergency Power OFF: Yes
Cord Length: 10 ft
Transfer Time: 4 ms
Power Description
Load Capacity (VA): 1.50 kVA
Load Capacity (Watt): 1.35 kW
Input Voltage: 110 V AC
Output Voltage: 120 V AC
Waveform Type: Sine Wave
Surge Energy Rating: 570 J
Management
Network Management: SNMP/Webcard
Alarm:
  • On Battery
  • Overload
  • Low Battery
Controls/Indicators
Status Indicators: LED Indicator
Interfaces/Ports
USB: Yes
Total Number of Expansion Slots: 1
Battery Information
DC System Voltage: 36 V DC
Battery Characteristics: Valve-regulated
Battery Chemistry: Lead Acid
Backup/Run Time (Full Load): 4.50 Minute
Backup/Run Time (Half Load): 13 Minute
Battery Life: 6 Year
Typical Battery Recharge Time: 4 Hour
Hot Swappable: Yes
Replaceable Battery: Yes
Environmental Conditions
Maximum Operating Temperature: 104°F (40°C)
Storage Temperature: 5°F (-15°C) - 122°F (50°C)
Maximum Operating Elevation: 6561.68 ft (2000000 mm)
Storage Relative Humidity: 0% - 95%
Sound Emission (A-Weighted): 45 dB(A)
Thermal Dissipation: 267 BTU/h
Physical Characteristics
Height: 3.50" (88.90 mm)
Width: 17.50" (444.50 mm)
Depth: 13.45" (341.63 mm)
Rack Height: 2U
Form Factor: Rack-mountable
Weight (Approximate): 20.87 kg
Miscellaneous
Package Contents:
  • SmartPro 1500RM2U UPS
  • Mounting hardware for 4 post rackmount installation
  • Cabling for USB & DB9 monitoring and EPO switching
  • PowerAlert unattended shutdown and UPS/Power monitoring software
  • Warranty information
Additional Information:
    • SMART1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression
    • 1500VA / 1350 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking, telecom and other sensitive electronic devices
    • Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional
    • 2-9USTAND accessory
    • Large internal batteries offer runtimes of 25 minutes at half load (750VA / 500 watts) and 10 minutes at full load (1500VA / 1350 watts)
    • Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
    • Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)
    • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
    • Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additoinal UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
    • Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
    • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
    • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
    • Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
    • Emergency Power Off (EPO) interface with cable
    • Multi-function audible alarms and set of 5 front panel LEDs
    • Network-grade AC surge suppression
    • Attractive all-black color scheme
    • UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
    • This unit has an LCD screen
    • Two year warranty with
    • 250,000 connected equipment insurance (USA & Canada only)
Certifications & Standards: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Recycled: No
Country of Origin: China
Environmentally Friendly: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 3 Year
Stay ON Forever

Protects Your Device From Power Outage & Blackout

Express Shipping

Canada Wide Discounted Shipping

OEM Standard

Long Lasting Powerful Batteries with 1 year warranty

Hassle Free Returns

Request RMA and Get Refunded Within 3 Days

Technical Support

Get Free Technical Support & Installation Guide

Technical Support

Get Free Technical Support & Installation Guide

Tripp Lite by Eaton SmartPro 1500RM2U UPS

UPC 0037332119209
2U Rack-mountable - 4 Hour Recharge - 4.50 Minute Stand-by - 110 V AC Input - 120 V AC Output - USB - 8 x NEMA 5-15R - SNMP/Webcard
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: SMART1500RM2U
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Line: SmartPro
Product Name: SmartPro 1500RM2U UPS
Marketing Information:

Protects Mission-Critical Rack-Mounted Equipment

  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload, low battery and fault conditions
  • 8 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 0.9 power factor rating
  • 570-joule surge suppression rating


Reliable Battery Backup

  • Supports half load up to 13 min. and full load up to 4.5 min.
  • Internal batteries designed for hot-swap field replacement
  • 95% line-power efficiency rating saves money in energy costs


2 Load Banks with Switchable Outlets

  • Can control 4 outlets remotely to reboot equipment or shed nonessential loads


Automatic Voltage Regulation (AVR)

  • Maintains 120V nominal output over input range of 83V-147V without using battery power


EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance


Interactive LCD Screen

  • Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
  • Rotates for easy viewing in rack-mount or tower configurations


Network Management Cards

  • Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD


Communications Ports

  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from
  • EPO">www.tripplite.com/poweralert port supports emergency shutdown in large facilities

  • EPO">
    Versatile Installation Options

  • EPO">
    • Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
    • Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
    • Mounts in upright tower position with optional 2-9USTAND accessory
  • EPO">
Packaged Quantity: 1 Each
Product Type: Line-interactive UPS
Technical Information
Plug/Connector Type: NEMA 5-15P
Receptacle Type: NEMA 5-15R
Receptacle Detail: 8 x NEMA 5-15R
Overload Protection: Yes
Emergency Power OFF: Yes
Cord Length: 10 ft
Transfer Time: 4 ms
Power Description
Load Capacity (VA): 1.50 kVA
Load Capacity (Watt): 1.35 kW
Input Voltage: 110 V AC
Output Voltage: 120 V AC
Waveform Type: Sine Wave
Surge Energy Rating: 570 J
Management
Network Management: SNMP/Webcard
Alarm:
  • On Battery
  • Overload
  • Low Battery
Controls/Indicators
Status Indicators: LED Indicator
Interfaces/Ports
USB: Yes
Total Number of Expansion Slots: 1
Battery Information
DC System Voltage: 36 V DC
Battery Characteristics: Valve-regulated
Battery Chemistry: Lead Acid
Backup/Run Time (Full Load): 4.50 Minute
Backup/Run Time (Half Load): 13 Minute
Battery Life: 6 Year
Typical Battery Recharge Time: 4 Hour
Hot Swappable: Yes
Replaceable Battery: Yes
Environmental Conditions
Maximum Operating Temperature: 104°F (40°C)
Storage Temperature: 5°F (-15°C) - 122°F (50°C)
Maximum Operating Elevation: 6561.68 ft (2000000 mm)
Storage Relative Humidity: 0% - 95%
Sound Emission (A-Weighted): 45 dB(A)
Thermal Dissipation: 267 BTU/h
Physical Characteristics
Height: 3.50" (88.90 mm)
Width: 17.50" (444.50 mm)
Depth: 13.45" (341.63 mm)
Rack Height: 2U
Form Factor: Rack-mountable
Weight (Approximate): 20.87 kg
Miscellaneous
Package Contents:
  • SmartPro 1500RM2U UPS
  • Mounting hardware for 4 post rackmount installation
  • Cabling for USB & DB9 monitoring and EPO switching
  • PowerAlert unattended shutdown and UPS/Power monitoring software
  • Warranty information
Additional Information:
    • SMART1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression
    • 1500VA / 1350 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking, telecom and other sensitive electronic devices
    • Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional
    • 2-9USTAND accessory
    • Large internal batteries offer runtimes of 25 minutes at half load (750VA / 500 watts) and 10 minutes at full load (1500VA / 1350 watts)
    • Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
    • Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)
    • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
    • Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additoinal UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
    • Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
    • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
    • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
    • Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
    • Emergency Power Off (EPO) interface with cable
    • Multi-function audible alarms and set of 5 front panel LEDs
    • Network-grade AC surge suppression
    • Attractive all-black color scheme
    • UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
    • This unit has an LCD screen
    • Two year warranty with
    • 250,000 connected equipment insurance (USA & Canada only)
Certifications & Standards: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Recycled: No
Country of Origin: China
Environmentally Friendly: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 3 Year
Here is the Manual Guide

ORDER PROCESSING

We ship from Toronto to Worldwide.
We process orders within 1-2 business days (excluding weekends and holidays).
Pre-ordered items are processed within 2-3 business days of arrival in stock.

Successfully placed orders will receive an e-mail confirmation with the order details.
If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.