Tripp Lite SmartPro SMART2200VS UPS - SMART2200VS

Tripp Lite SmartPro SMART2200VS UPS - SMART2200VS

$2,228.69
Availability:
Out of stock

Tripp Lite SmartPro SMART2200VS UPS

UPC 0037332115874
2200VA/1600W - 7 Minute Full Load - 7 x NEMA 5-15R, 2 x NEMA 5-20R
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: SMART2200VS
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Line: SmartPro
Product Name: SmartPro SMART2200VS UPS
Marketing Information:

Tripp Lite's SMART 2200VS intelligent, line interactive UPS protects server, networking and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Small footprint, tower UPS system occupies only 106 square inches of floor space with a height of only 14.25 inches. Large capacity 2200 VA/ 1600 watt rated UPS system offers 7 minutes runtime at full load and 19 minutes at half load during power failures. Line interactive voltage regulation corrects brownouts as low as 79V and overvoltages as high as 147V to fully regulated 120V nominal output for smooth continuous operation of connected equipment. Includes a total of 9 outlets, 3 pairs of which can be individually powered off and back on via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for more critical loads. Includes 2 DB9 and 2 USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data. Ships in attractive gray color scheme. Compatible with Tripp Lite's PowerAlert and Watchdog service software.

Product Type: Line-interactive UPS
Technical Information
Plug/Connector Type: NEMA 5-20P
Receptacle Type:
  • NEMA 5-15R
  • NEMA 5-20R
Receptacle Detail:
  • 7 x NEMA 5-15R
  • 2 x NEMA 5-20R
Emergency Power OFF: Yes
Cord Length: 8 ft
Transfer Time: 4 ms
Power Description
Load Capacity (VA): 2.20 kVA
Load Capacity (Watt): 1.60 kW
Input Voltage: 120 V AC
Output Voltage: 120 V AC
Management
Network Management: SNMP Manageable
Alarm:
  • On Battery
  • Overload
  • Low Battery
Controls/Indicators
Status Indicators: Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information
Interfaces/Ports
USB: Yes
Total Number of Expansion Slots: 1
Battery Information
Battery Chemistry: Lead Acid
Backup/Run Time (Full Load): 7 Minute
Backup/Run Time (Half Load): 19 Minute
Battery Life: 6 Year
Typical Battery Recharge Time: 4 Hour
Hot Swappable: Yes
Environmental Conditions
Maximum Operating Temperature: 104°F (40°C)
Physical Characteristics
Height: 14.25" (361.95 mm)
Width: 9.25" (234.95 mm)
Depth: 12" (304.80 mm)
Form Factor: Tower
Weight (Approximate): 23.77 kg
Miscellaneous
Package Contents:
  • SmartPro SMART2200VS UPS
  • SMART 2200VS UPS System, PowerAlert Software and cabling, Warranty information, Instruction manual
Additional Information:
    • 2200VA / 1600 watt output capacity accommodates a variety of server, networking and telecom devices
    • High power density 2.2kVA UPS system occupies only 106 square inches of floorspace with a height of only 14.25 inches
    • Compatible with North American 120V / 60 Hz power as found in the USA, Canada and Mexico
    • Offers 7 minutes runtime with a full load of 2200VA and 19 minutes with a half load of 1100VA
    • Line interactive voltage regulation corrects severe brownouts and overvoltages from 79 to 147v back to normal 120v levels without using battery power
    • 9 total outlets (7 NEMA5-15R; 2 NEMA5-15/20R)
    • Includes NEMA 5-20 straight blade 20 amp input plug connection; package includes optional user installable NEMA 5-15 input plug connection
    • Notification of system status via 5 LEDs and multi-function audible alarms
    • Included PowerAlert Software provides e-mail or pager notification of power problems and the simultaneous automatic unattended shutdown of multiple servers
    • 4 built-in communications ports (2-DB9, 2-USB) for remote monitoring and unattended shutdown
    • Slot for SNMP/web card (part#: SNMPWEBCARD) and environmental sensor (part#: ENVIROSENSE) for remote communications in large IP environments
    • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again
    • Communication ports support on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment
    • 3 pairs of customized load management receptacles can be individually powered off and back on again via software interface to reboot remote equipment or automatic "load shedding" of less critical loads to extend battery runtime for the most critical equipment
    • Built-in Emergency Power Off (EPO) interface supports emergency shutoff in large facilities
    • Hot-swappable / user replaceable batteries allow on-site battery replacement through the front panel without powering off connected equipment or removing the UPS from the rack
    • UPS battery set ships fully assembled and ready for use, no time consuming, connection of individual internal batteries by user is necessary
    • UL (USA), cUL (Canada), NOM (Mexico), FCC Class A
    • 250,000 Ultimate Lifetime Insurance. No warranty cards required for coverage!
    • 2 year manufacturers product warranty
Certifications & Standards: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of Origin: China
Warranty
Limited Warranty: 3 Year
Stay ON Forever

Protects Your Device From Power Outage & Blackout

Express Shipping

Canada Wide Discounted Shipping

OEM Standard

Long Lasting Powerful Batteries with 1 year warranty

Hassle Free Returns

Request RMA and Get Refunded Within 3 Days

Technical Support

Get Free Technical Support & Installation Guide

Technical Support

Get Free Technical Support & Installation Guide

Tripp Lite SmartPro SMART2200VS UPS

UPC 0037332115874
2200VA/1600W - 7 Minute Full Load - 7 x NEMA 5-15R, 2 x NEMA 5-20R
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: SMART2200VS
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Line: SmartPro
Product Name: SmartPro SMART2200VS UPS
Marketing Information:

Tripp Lite's SMART 2200VS intelligent, line interactive UPS protects server, networking and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Small footprint, tower UPS system occupies only 106 square inches of floor space with a height of only 14.25 inches. Large capacity 2200 VA/ 1600 watt rated UPS system offers 7 minutes runtime at full load and 19 minutes at half load during power failures. Line interactive voltage regulation corrects brownouts as low as 79V and overvoltages as high as 147V to fully regulated 120V nominal output for smooth continuous operation of connected equipment. Includes a total of 9 outlets, 3 pairs of which can be individually powered off and back on via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for more critical loads. Includes 2 DB9 and 2 USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data. Ships in attractive gray color scheme. Compatible with Tripp Lite's PowerAlert and Watchdog service software.

Product Type: Line-interactive UPS
Technical Information
Plug/Connector Type: NEMA 5-20P
Receptacle Type:
  • NEMA 5-15R
  • NEMA 5-20R
Receptacle Detail:
  • 7 x NEMA 5-15R
  • 2 x NEMA 5-20R
Emergency Power OFF: Yes
Cord Length: 8 ft
Transfer Time: 4 ms
Power Description
Load Capacity (VA): 2.20 kVA
Load Capacity (Watt): 1.60 kW
Input Voltage: 120 V AC
Output Voltage: 120 V AC
Management
Network Management: SNMP Manageable
Alarm:
  • On Battery
  • Overload
  • Low Battery
Controls/Indicators
Status Indicators: Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information
Interfaces/Ports
USB: Yes
Total Number of Expansion Slots: 1
Battery Information
Battery Chemistry: Lead Acid
Backup/Run Time (Full Load): 7 Minute
Backup/Run Time (Half Load): 19 Minute
Battery Life: 6 Year
Typical Battery Recharge Time: 4 Hour
Hot Swappable: Yes
Environmental Conditions
Maximum Operating Temperature: 104°F (40°C)
Physical Characteristics
Height: 14.25" (361.95 mm)
Width: 9.25" (234.95 mm)
Depth: 12" (304.80 mm)
Form Factor: Tower
Weight (Approximate): 23.77 kg
Miscellaneous
Package Contents:
  • SmartPro SMART2200VS UPS
  • SMART 2200VS UPS System, PowerAlert Software and cabling, Warranty information, Instruction manual
Additional Information:
    • 2200VA / 1600 watt output capacity accommodates a variety of server, networking and telecom devices
    • High power density 2.2kVA UPS system occupies only 106 square inches of floorspace with a height of only 14.25 inches
    • Compatible with North American 120V / 60 Hz power as found in the USA, Canada and Mexico
    • Offers 7 minutes runtime with a full load of 2200VA and 19 minutes with a half load of 1100VA
    • Line interactive voltage regulation corrects severe brownouts and overvoltages from 79 to 147v back to normal 120v levels without using battery power
    • 9 total outlets (7 NEMA5-15R; 2 NEMA5-15/20R)
    • Includes NEMA 5-20 straight blade 20 amp input plug connection; package includes optional user installable NEMA 5-15 input plug connection
    • Notification of system status via 5 LEDs and multi-function audible alarms
    • Included PowerAlert Software provides e-mail or pager notification of power problems and the simultaneous automatic unattended shutdown of multiple servers
    • 4 built-in communications ports (2-DB9, 2-USB) for remote monitoring and unattended shutdown
    • Slot for SNMP/web card (part#: SNMPWEBCARD) and environmental sensor (part#: ENVIROSENSE) for remote communications in large IP environments
    • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again
    • Communication ports support on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment
    • 3 pairs of customized load management receptacles can be individually powered off and back on again via software interface to reboot remote equipment or automatic "load shedding" of less critical loads to extend battery runtime for the most critical equipment
    • Built-in Emergency Power Off (EPO) interface supports emergency shutoff in large facilities
    • Hot-swappable / user replaceable batteries allow on-site battery replacement through the front panel without powering off connected equipment or removing the UPS from the rack
    • UPS battery set ships fully assembled and ready for use, no time consuming, connection of individual internal batteries by user is necessary
    • UL (USA), cUL (Canada), NOM (Mexico), FCC Class A
    • 250,000 Ultimate Lifetime Insurance. No warranty cards required for coverage!
    • 2 year manufacturers product warranty
Certifications & Standards: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of Origin: China
Warranty
Limited Warranty: 3 Year
Here is the Manual Guide

ORDER PROCESSING

We ship from Toronto to Worldwide.
We process orders within 1-2 business days (excluding weekends and holidays).
Pre-ordered items are processed within 2-3 business days of arrival in stock.

Successfully placed orders will receive an e-mail confirmation with the order details.
If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.