Protects Your Device From Power Outage & Blackout
Canada Wide Discounted Shipping
Long Lasting Powerful Batteries with 1 year warranty
Request RMA and Get Refunded Within 3 Days
Get Free Technical Support & Installation Guide
Get Free Technical Support & Installation Guide
Tripp Lite series SMART3000RMXLN UPS System with Pre-installed SNMPWEBCARD
UPC | 0037332177896 |
2U Rack/Tower - AVR - 5 Hour Recharge - 3 Minute Stand-by - 120 V AC Input - 110 V AC, 115 V AC, 120 V AC Output - Single Phase - Serial Port - USB - 1 x NEMA L5-30R, 8 x NEMA 5-15/20R - SNMP Manageable |
General Information | |
---|---|
Manufacturer: | Tripp Lite by Eaton |
Manufacturer Part Number: | SMART3000RMXLN |
Manufacturer Website Address: | https://tripplite.eaton.com/ |
Brand Name: | Tripp Lite series |
Product Series: | SmartPro |
Product Model: | SMART3000RMXLN |
Product Name: | SMART3000RMXLN UPS System with Pre-installed SNMPWEBCARD |
Marketing Information: |
3kVA/3kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments The SMART3000RMXLN provides reliable battery backup and AC power protection for connected devices against blackouts, brownouts, surges and line noise. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment. Pure sine wave power and unity power factor, even when on battery, means this SmartPro® UPS can be used with sensitive IT equipment, including servers, VoIP phones, data storage and PoE switches. Even if the battery is depleted, the UPS will automatically restart when the power comes back on after an extended outage. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately). NEMA Outlets Protect Your Connected Components One L5-30R and six managed 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating. Pre-Installed LX Platform Network Management Card Allows Remote Access 24/7 The WEBCARDLXE network interface enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options. Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART3000RMXLN maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. |
Product Type: | Line-interactive UPS | Technical Information |
AVR: | Yes |
Plug/Connector Type: | NEMA L5-30P |
Receptacle Type: |
|
Receptacle Detail: |
|
Emergency Power OFF: | Yes |
Transfer Time: | 5 ms |
EMI/RFI Noise Filter: | Yes |
Phase: | Single Phase | Power Description |
Load Capacity (VA): | 3 kVA |
Load Capacity (Watt): | 2.88 kW |
Input Voltage: | 120 V AC |
Output Voltage: |
|
Input Frequency: | 60 Hz |
Output Frequency: | 60 Hz |
Waveform Type: | Pure Sine Wave |
Surge Energy Rating: | 570 J | Management |
Network Management: | SNMP Manageable |
Alarm: |
|
Controls/Indicators |
Status Indicators: | Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec). | Interfaces/Ports |
Serial Port: | Yes |
USB: | Yes | Battery Information |
DC System Voltage: | 48 V DC |
Backup/Run Time (Full Load): | 3 Minute |
Backup/Run Time (Half Load): | 10 Minute |
Typical Battery Recharge Time: | 5 Hour |
Hot Swappable: | Yes |
Replaceable Battery: | Yes | Environmental Conditions |
Maximum Operating Temperature: | 104°F (40°C) |
Storage Temperature: | 5°F (-15°C) - 122°F (50°C) | Physical Characteristics |
Height: | 3.50" (88.90 mm) |
Width: | 17.50" (444.50 mm) |
Depth: | 19" (482.60 mm) |
Rack Height: | 2U |
Form Factor: | Rack/Tower |
Weight (Approximate): | 33.02 kg | Miscellaneous |
Package Contents: |
|
Certifications & Standards: |
|
Software Included: | PowerAlert Software |
Country of Origin: | China |
Environmentally Friendly: | Yes |
Environmental Compliance: | Restriction of Hazardous Substances (RoHS) | Warranty |
Limited Warranty: | 3 Year |
ORDER PROCESSING
We ship from Toronto to Worldwide.We process orders within 1-2 business days (excluding weekends and holidays).
Pre-ordered items are processed within 2-3 business days of arrival in stock.
Successfully placed orders will receive an e-mail confirmation with the order details.
If you do not receive an e-mail, please check your spam filter or contact us for confirmation.
If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.