Tripp Lite SmartPro 700HG UPS - SMART700HG

Tripp Lite SmartPro 700HG UPS - SMART700HG

$1,681.55
Availability:
Out of stock

Tripp Lite SmartPro 700HG UPS

UPC 037332095107
700VA/450W - 18 Minute Full Load - 4 x NEMA 5-15R
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: SMART700HG
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Line: SmartPro
Product Name: SmartPro 700HG UPS
Marketing Information:

Tripp Lite's SMART700HG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 700VA/450W capacity provides up to 42 minutes of runtime for a half load, or 18 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output, without drawing battery power. The SMART700HG's built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a 6 ft. cord for flexibility in placement. All four outlets provide both backup protection and surge protection, rated to 480 joules. The SMART700HG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite's free downloadable PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Application Usage

This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMART700HG in this type of application will void the battery warranty. For mobile applications, Tripp Lite recommends the SMART700HGL with lithium iron phosphate (LiFePo4) battery.

Product Type: Line-interactive UPS
Technical Information
Plug/Connector Type: NEMA 5-15P
Receptacle Type: NEMA 5-15R
Receptacle Detail: 4 x NEMA 5-15R
Cord Length: 6 ft
Transfer Time: 4 ms
Power Description
Load Capacity (VA): 700 VA
Load Capacity (Watt): 450 W
Input Voltage: 120 V AC
Output Voltage: 120 V AC
Management
Network Management: SNMP Manageable
Alarm:
  • On Battery
  • Overload
  • Low Battery
Controls/Indicators
Status Indicators: 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning
Interfaces/Ports
USB: Yes
Battery Information
Battery Chemistry: Lead Acid
Backup/Run Time (Full Load): 18 Minute
Backup/Run Time (Half Load): 42 Minute
Battery Life: 6 Year
Typical Battery Recharge Time: 4 Hour
Hot Swappable: Yes
Environmental Conditions
Maximum Operating Temperature: 104°F (40°C)
Physical Characteristics
Height: 12.50" (317.50 mm)
Width: 7" (177.80 mm)
Depth: 9" (228.60 mm)
Form Factor: Tower
Weight (Approximate): 19.96 kg
Miscellaneous
Package Contents:
  • SmartPro 700HG UPS
  • SMART 700HG Medical Grade UPS System
  • One USB and One DB9 monitoring cable
  • Warranty information
  • Instruction manual
Additional Information:
  • Ideal UPS protection for applications in medical patient-care areas where UL2601-1 listed medical electrical equipment is required
  • Maintains less than 300 microamps leakage current for UPS and all connected equipment
  • Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
  • Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
  • Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
  • Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment
  • Resistant to electrostatic discharge
  • Supports loads up to 700VA / 450 watts
  • 42 minutes half load runtime (with 350VA load), 18 minutes full load runtime (with 700VA load)
  • 4 protected hospital-grade outlets; 6-ft. cord
  • RS-232 and USB monitoring ports for remote monitoring and unattended shutdown
  • SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory
  • PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included)
  • Complete surge protection, line isolation and EMI/RFI noise filtering
  • 2 year product warranty
  • 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
  • Battery replacement door
  • Grounding lug
Certifications & Standards: UL1778 (USA, Series AGSM700PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of Origin: China
Warranty
Limited Warranty: 2 Year
Stay ON Forever

Protects Your Device From Power Outage & Blackout

Express Shipping

Canada Wide Discounted Shipping

OEM Standard

Long Lasting Powerful Batteries with 1 year warranty

Hassle Free Returns

Request RMA and Get Refunded Within 3 Days

Technical Support

Get Free Technical Support & Installation Guide

Technical Support

Get Free Technical Support & Installation Guide

Tripp Lite SmartPro 700HG UPS

UPC 037332095107
700VA/450W - 18 Minute Full Load - 4 x NEMA 5-15R
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: SMART700HG
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Line: SmartPro
Product Name: SmartPro 700HG UPS
Marketing Information:

Tripp Lite's SMART700HG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 700VA/450W capacity provides up to 42 minutes of runtime for a half load, or 18 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output, without drawing battery power. The SMART700HG's built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a 6 ft. cord for flexibility in placement. All four outlets provide both backup protection and surge protection, rated to 480 joules. The SMART700HG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite's free downloadable PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Application Usage

This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMART700HG in this type of application will void the battery warranty. For mobile applications, Tripp Lite recommends the SMART700HGL with lithium iron phosphate (LiFePo4) battery.

Product Type: Line-interactive UPS
Technical Information
Plug/Connector Type: NEMA 5-15P
Receptacle Type: NEMA 5-15R
Receptacle Detail: 4 x NEMA 5-15R
Cord Length: 6 ft
Transfer Time: 4 ms
Power Description
Load Capacity (VA): 700 VA
Load Capacity (Watt): 450 W
Input Voltage: 120 V AC
Output Voltage: 120 V AC
Management
Network Management: SNMP Manageable
Alarm:
  • On Battery
  • Overload
  • Low Battery
Controls/Indicators
Status Indicators: 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning
Interfaces/Ports
USB: Yes
Battery Information
Battery Chemistry: Lead Acid
Backup/Run Time (Full Load): 18 Minute
Backup/Run Time (Half Load): 42 Minute
Battery Life: 6 Year
Typical Battery Recharge Time: 4 Hour
Hot Swappable: Yes
Environmental Conditions
Maximum Operating Temperature: 104°F (40°C)
Physical Characteristics
Height: 12.50" (317.50 mm)
Width: 7" (177.80 mm)
Depth: 9" (228.60 mm)
Form Factor: Tower
Weight (Approximate): 19.96 kg
Miscellaneous
Package Contents:
  • SmartPro 700HG UPS
  • SMART 700HG Medical Grade UPS System
  • One USB and One DB9 monitoring cable
  • Warranty information
  • Instruction manual
Additional Information:
  • Ideal UPS protection for applications in medical patient-care areas where UL2601-1 listed medical electrical equipment is required
  • Maintains less than 300 microamps leakage current for UPS and all connected equipment
  • Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
  • Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
  • Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
  • Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment
  • Resistant to electrostatic discharge
  • Supports loads up to 700VA / 450 watts
  • 42 minutes half load runtime (with 350VA load), 18 minutes full load runtime (with 700VA load)
  • 4 protected hospital-grade outlets; 6-ft. cord
  • RS-232 and USB monitoring ports for remote monitoring and unattended shutdown
  • SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory
  • PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included)
  • Complete surge protection, line isolation and EMI/RFI noise filtering
  • 2 year product warranty
  • 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
  • Battery replacement door
  • Grounding lug
Certifications & Standards: UL1778 (USA, Series AGSM700PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of Origin: China
Warranty
Limited Warranty: 2 Year
Here is the Manual Guide

ORDER PROCESSING

We ship from Toronto to Worldwide.
We process orders within 1-2 business days (excluding weekends and holidays).
Pre-ordered items are processed within 2-3 business days of arrival in stock.

Successfully placed orders will receive an e-mail confirmation with the order details.
If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.