Tripp Lite by Eaton SmartPro SMX700HGL 700VA Tower UPS - SMX700HGL

Tripp Lite by Eaton SmartPro SMX700HGL 700VA Tower UPS - SMX700HGL

$3,861.17
Availability:
Out of stock

Tripp Lite by Eaton SmartPro SMX700HGL 700VA Tower UPS

UPC 0037332224804
Tower - 3.60 Hour Recharge - 14.50 Minute Stand-by - 230 V AC Input - 220 V AC, 230 V AC, 240 V AC Output - Single Phase - Pulse-width Modulated Sine Wave - 6 x IEC 60320 C13
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: SMX700HGL
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Line: SmartPro
Product Series: SMX
Product Model: SMX700HGL
Product Name: SmartPro SMX700HGL 700VA Tower UPS
Marketing Information:

700VA/450W Medical-Grade UPS Allows Time to Back Up Critical Files During a Blackout

This 230V SmartPro® hospital-grade UPS is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, which makes it ideal for use in medical facilities, including patient care vicinities. It allows you to work through short power failures, and gives you enough time to safely save files and shut down your system in case of a prolonged blackout.

Long-Lasting LiFePhos Battery Handles up to 10,000 Cycles with Ease

This UPS system for hospitals contains a replaceable lithium iron phosphate (LiFePhos) internal battery that provides up to 30 times the cycle life of traditional sealed lead acid (SLA) batteries. The 6-outlet UPS system provides up to 42 minutes of battery backup at half load and 18 minutes at full load. During normal operation, incoming utility power keeps the replaceable internal battery fully charged, so backup power will always be available.

Automatic Voltage Regulation (AVR) Corrects Potentially Hazardous Voltage Fluctuations

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. This UPS for medical equipment can correct brownouts as low as 155V and overvoltages as high as 274V back to nominal 230V power without drawing on the battery backup needed to support your equipment during a blackout.

Built-In Isolation Transformer Offers Full Isolation

The isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

Connect Your Equipment to 6 IEC 320 C13 Outlets

Six C13 hospital-grade outlets provide both battery backup and surge protector for your mobile medical equipment, such as computers, monitors and lab equipment. A 340-joule surge suppression rating protects connected components from the harmful effects of power surges.

Combats Electromagnetic Interference That Can Harm Equipment

Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage, data corruption and audio/video transmission problems. This medical-grade UPS system incorporates technology that filters out disruptive line noise so that it won't affect your equipment.

Easy-to-Read LEDs and Alarm Report Real-Time UPS and Power Status

Front-panel LED indicators monitor essential information, such as line power, battery power, overload, voltage regulation and battery low/replace status. An audible alarm will sound in case of low battery, excessive load and power failure.

Saves Your Files, Even When You're Away

USB and DB9 serial ports connect to your computer with the included cables. These ports communicate with Tripp Lite's free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Tower Form Factor for Easy Placement on a Nurse's Station or Mobile Medical Cart

The long-lasting PVC housing fits easily on a desktop, shelf or anywhere else power is needed. The 15-centimeter (six-inch) dongle with hospital-grade C14 plug connects to a properly grounded AC wall outlet.

Product Type: Line-interactive UPS
Technical Information
Plug/Connector Type: IEC 60320 C14
Receptacle Type: IEC 60320 C13
Receptacle Detail: 6 x IEC 60320 C13
Phase: Single Phase
Application/Usage:
  • Medical
  • Computer
  • Monitor
  • Lab Equipment
Power Description
Load Capacity (VA): 700 VA
Load Capacity (Watt): 450 W
Input Voltage: 230 V AC
Output Voltage:
  • 220 V AC
  • 230 V AC
  • 240 V AC
Waveform Type: Pulse-width Modulated Sine Wave
Battery Information
Backup/Run Time (Full Load): 14.50 Minute
Typical Battery Recharge Time: 3.60 Hour
Hot Swappable: Yes
Physical Characteristics
Height: 12.80" (325.12 mm)
Width: 7.50" (190.50 mm)
Depth: 9" (228.60 mm)
Form Factor: Tower
Weight (Approximate): 19.10 kg
Miscellaneous
Package Contents:
  • SmartPro SMX700HGL 700VA Tower UPS
  • USB Monitoring Cable, 1.8 m (6 ft.)
  • DB9 Serial Monitoring Cable, 1.8 m (6 ft.)
  • Owner's Manual
Country of Origin: China
Environmentally Friendly: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 5 Year
Stay ON Forever

Protects Your Device From Power Outage & Blackout

Express Shipping

Canada Wide Discounted Shipping

OEM Standard

Long Lasting Powerful Batteries with 1 year warranty

Hassle Free Returns

Request RMA and Get Refunded Within 3 Days

Technical Support

Get Free Technical Support & Installation Guide

Technical Support

Get Free Technical Support & Installation Guide

Tripp Lite by Eaton SmartPro SMX700HGL 700VA Tower UPS

UPC 0037332224804
Tower - 3.60 Hour Recharge - 14.50 Minute Stand-by - 230 V AC Input - 220 V AC, 230 V AC, 240 V AC Output - Single Phase - Pulse-width Modulated Sine Wave - 6 x IEC 60320 C13
General Information
Manufacturer: Tripp Lite by Eaton
Manufacturer Part Number: SMX700HGL
Manufacturer Website Address: https://tripplite.eaton.com/
Brand Name: Tripp Lite by Eaton
Product Line: SmartPro
Product Series: SMX
Product Model: SMX700HGL
Product Name: SmartPro SMX700HGL 700VA Tower UPS
Marketing Information:

700VA/450W Medical-Grade UPS Allows Time to Back Up Critical Files During a Blackout

This 230V SmartPro® hospital-grade UPS is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, which makes it ideal for use in medical facilities, including patient care vicinities. It allows you to work through short power failures, and gives you enough time to safely save files and shut down your system in case of a prolonged blackout.

Long-Lasting LiFePhos Battery Handles up to 10,000 Cycles with Ease

This UPS system for hospitals contains a replaceable lithium iron phosphate (LiFePhos) internal battery that provides up to 30 times the cycle life of traditional sealed lead acid (SLA) batteries. The 6-outlet UPS system provides up to 42 minutes of battery backup at half load and 18 minutes at full load. During normal operation, incoming utility power keeps the replaceable internal battery fully charged, so backup power will always be available.

Automatic Voltage Regulation (AVR) Corrects Potentially Hazardous Voltage Fluctuations

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. This UPS for medical equipment can correct brownouts as low as 155V and overvoltages as high as 274V back to nominal 230V power without drawing on the battery backup needed to support your equipment during a blackout.

Built-In Isolation Transformer Offers Full Isolation

The isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

Connect Your Equipment to 6 IEC 320 C13 Outlets

Six C13 hospital-grade outlets provide both battery backup and surge protector for your mobile medical equipment, such as computers, monitors and lab equipment. A 340-joule surge suppression rating protects connected components from the harmful effects of power surges.

Combats Electromagnetic Interference That Can Harm Equipment

Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage, data corruption and audio/video transmission problems. This medical-grade UPS system incorporates technology that filters out disruptive line noise so that it won't affect your equipment.

Easy-to-Read LEDs and Alarm Report Real-Time UPS and Power Status

Front-panel LED indicators monitor essential information, such as line power, battery power, overload, voltage regulation and battery low/replace status. An audible alarm will sound in case of low battery, excessive load and power failure.

Saves Your Files, Even When You're Away

USB and DB9 serial ports connect to your computer with the included cables. These ports communicate with Tripp Lite's free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Tower Form Factor for Easy Placement on a Nurse's Station or Mobile Medical Cart

The long-lasting PVC housing fits easily on a desktop, shelf or anywhere else power is needed. The 15-centimeter (six-inch) dongle with hospital-grade C14 plug connects to a properly grounded AC wall outlet.

Product Type: Line-interactive UPS
Technical Information
Plug/Connector Type: IEC 60320 C14
Receptacle Type: IEC 60320 C13
Receptacle Detail: 6 x IEC 60320 C13
Phase: Single Phase
Application/Usage:
  • Medical
  • Computer
  • Monitor
  • Lab Equipment
Power Description
Load Capacity (VA): 700 VA
Load Capacity (Watt): 450 W
Input Voltage: 230 V AC
Output Voltage:
  • 220 V AC
  • 230 V AC
  • 240 V AC
Waveform Type: Pulse-width Modulated Sine Wave
Battery Information
Backup/Run Time (Full Load): 14.50 Minute
Typical Battery Recharge Time: 3.60 Hour
Hot Swappable: Yes
Physical Characteristics
Height: 12.80" (325.12 mm)
Width: 7.50" (190.50 mm)
Depth: 9" (228.60 mm)
Form Factor: Tower
Weight (Approximate): 19.10 kg
Miscellaneous
Package Contents:
  • SmartPro SMX700HGL 700VA Tower UPS
  • USB Monitoring Cable, 1.8 m (6 ft.)
  • DB9 Serial Monitoring Cable, 1.8 m (6 ft.)
  • Owner's Manual
Country of Origin: China
Environmentally Friendly: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 5 Year
Here is the Manual Guide

ORDER PROCESSING

We ship from Toronto to Worldwide.
We process orders within 1-2 business days (excluding weekends and holidays).
Pre-ordered items are processed within 2-3 business days of arrival in stock.

Successfully placed orders will receive an e-mail confirmation with the order details.
If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.