Tripp Lite by Eaton B110-SP-CAT-OD Surge Protector Module - B110-SP-CAT-OD - Surge Protector Module, 2 x RJ-45

Tripp Lite by Eaton B110-SP-CAT-OD Surge Protector Module - B110-SP-CAT-OD - Surge Protector Module, 2 x RJ-45

$123.20 $252.59
Availability:
Out of stock
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Surge Protector Module
  • Manufacturer Part Number: B110-SP-CAT-OD
  • Receptacles: 2 x RJ-45

  • Marketing Information:

    Outdoor In-Line Surge Protector Keeps Your 1G PoE Edge Network Equipment Safe

    Ideal for home/corporate security systems, wireless access points, routers, bridges and other PoE (Power over Ethernet) applications, the B110-SP-CAT-OD protects outdoor-mounted network equipment from damage caused by lightning, power surges, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network equipment using standard 23/24 AWG Cat5e/6/6a cables (sold separately) and the included cable glands. Both mid-span and end-span PoE are supported. Note: two B110-SP-CAT-OD surge protectors are required to protect both source and device.

    Your Last Defense Against Intruding Voltage Spikes That Can Cause Costly Downtime

    Thyristor diode technology features low impedance and superior power handling capabilities, providing protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. Line-to-line and line-to-ground protection modes help protect against short circuits and minimize distortion of high-speed signals. The B110-SP-CAT-OD meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact) and IEC 61000-4-5 (Lightning) 10kA (8/20µs), 20kV (8/20µs).

    IP66 Rating Denotes Resistance to Dust and Water

    The housing's IP66 rating means the surge protector is not only 100% protected against dust, but also able to endure high-pressure jets of water from any direction with no damage or decline in performance. In addition to its water and dust resistance, which keeps it safe in storms and other foul weather, the B110-SP-CAT-OD is shockproof, giving you peace of mind without worrying about the unit being jarred and damaged.

    Ready to Use Right from the Package, So You Can Plug and Play Immediately

    This PoE in-line surge protector meets 802.3af, 802.3at and 802.3bt IEEE standards, supporting up to 90W of DC power (due to power dissipation, powered devices receive 71W) and Ethernet data speeds up to 1 Gbps. No external power supply is required. Rear mounting holes allow for convenient installation where needed, such as high on a wall or pole. The distance between the B110-SP-CAT-OD and the equipment it is protecting should not exceed 328 feet (for best performance, the installation's total cable distance should not exceed 328 feet).

    TAA-Compliant for GSA Schedule Purchases

    The B110-SP-CAT-OD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B110-SP-CAT-OD
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:B110-SP-CAT-OD
  • Product Name:B110-SP-CAT-OD Surge Protector Module

  • Marketing Information:

    Outdoor In-Line Surge Protector Keeps Your 1G PoE Edge Network Equipment Safe

    Ideal for home/corporate security systems, wireless access points, routers, bridges and other PoE (Power over Ethernet) applications, the B110-SP-CAT-OD protects outdoor-mounted network equipment from damage caused by lightning, power surges, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network equipment using standard 23/24 AWG Cat5e/6/6a cables (sold separately) and the included cable glands. Both mid-span and end-span PoE are supported. Note: two B110-SP-CAT-OD surge protectors are required to protect both source and device.

    Your Last Defense Against Intruding Voltage Spikes That Can Cause Costly Downtime

    Thyristor diode technology features low impedance and superior power handling capabilities, providing protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. Line-to-line and line-to-ground protection modes help protect against short circuits and minimize distortion of high-speed signals. The B110-SP-CAT-OD meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact) and IEC 61000-4-5 (Lightning) 10kA (8/20µs), 20kV (8/20µs).

    IP66 Rating Denotes Resistance to Dust and Water

    The housing's IP66 rating means the surge protector is not only 100% protected against dust, but also able to endure high-pressure jets of water from any direction with no damage or decline in performance. In addition to its water and dust resistance, which keeps it safe in storms and other foul weather, the B110-SP-CAT-OD is shockproof, giving you peace of mind without worrying about the unit being jarred and damaged.

    Ready to Use Right from the Package, So You Can Plug and Play Immediately

    This PoE in-line surge protector meets 802.3af, 802.3at and 802.3bt IEEE standards, supporting up to 90W of DC power (due to power dissipation, powered devices receive 71W) and Ethernet data speeds up to 1 Gbps. No external power supply is required. Rear mounting holes allow for convenient installation where needed, such as high on a wall or pole. The distance between the B110-SP-CAT-OD and the equipment it is protecting should not exceed 328 feet (for best performance, the installation's total cable distance should not exceed 328 feet).

    TAA-Compliant for GSA Schedule Purchases

    The B110-SP-CAT-OD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.


    PRODUCT SPECIFICATIONS
    Receptacles 2 x RJ-45
    Dataline Protection Ethernet
    Power Handling 90 VA
    Height 6.54" (166.12 mm)
    Width 3.15" (80.01 mm)
    Depth 2.76" (70.10 mm)
    Weight (Approximate) 249.5 g
    Package Contents
    • B110-SP-CAT-OD Surge Protector Module
    • Grounding Wire, 18 AWG, 1 ft.
    • 2 x Metric Cable Glands, 8.4 mm
    • 2 x PCBA Mounting Screws
    • 4 x Surface Mounting Screws
    • 4 x Surface Screw Anchors
    • 4 x Unit Cover Screws
    • Owner's Manual
    Country of Origin China
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    • Restriction of Hazardous Substances (RoHS)
    Limited Warranty 2 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Surge Protector Module
    • Manufacturer Part Number: B110-SP-CAT-OD
    • Receptacles: 2 x RJ-45

    • Marketing Information:

      Outdoor In-Line Surge Protector Keeps Your 1G PoE Edge Network Equipment Safe

      Ideal for home/corporate security systems, wireless access points, routers, bridges and other PoE (Power over Ethernet) applications, the B110-SP-CAT-OD protects outdoor-mounted network equipment from damage caused by lightning, power surges, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network equipment using standard 23/24 AWG Cat5e/6/6a cables (sold separately) and the included cable glands. Both mid-span and end-span PoE are supported. Note: two B110-SP-CAT-OD surge protectors are required to protect both source and device.

      Your Last Defense Against Intruding Voltage Spikes That Can Cause Costly Downtime

      Thyristor diode technology features low impedance and superior power handling capabilities, providing protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. Line-to-line and line-to-ground protection modes help protect against short circuits and minimize distortion of high-speed signals. The B110-SP-CAT-OD meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact) and IEC 61000-4-5 (Lightning) 10kA (8/20µs), 20kV (8/20µs).

      IP66 Rating Denotes Resistance to Dust and Water

      The housing's IP66 rating means the surge protector is not only 100% protected against dust, but also able to endure high-pressure jets of water from any direction with no damage or decline in performance. In addition to its water and dust resistance, which keeps it safe in storms and other foul weather, the B110-SP-CAT-OD is shockproof, giving you peace of mind without worrying about the unit being jarred and damaged.

      Ready to Use Right from the Package, So You Can Plug and Play Immediately

      This PoE in-line surge protector meets 802.3af, 802.3at and 802.3bt IEEE standards, supporting up to 90W of DC power (due to power dissipation, powered devices receive 71W) and Ethernet data speeds up to 1 Gbps. No external power supply is required. Rear mounting holes allow for convenient installation where needed, such as high on a wall or pole. The distance between the B110-SP-CAT-OD and the equipment it is protecting should not exceed 328 feet (for best performance, the installation's total cable distance should not exceed 328 feet).

      TAA-Compliant for GSA Schedule Purchases

      The B110-SP-CAT-OD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B110-SP-CAT-OD
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:B110-SP-CAT-OD
  • Product Name:B110-SP-CAT-OD Surge Protector Module

  • Marketing Information:

    Outdoor In-Line Surge Protector Keeps Your 1G PoE Edge Network Equipment Safe

    Ideal for home/corporate security systems, wireless access points, routers, bridges and other PoE (Power over Ethernet) applications, the B110-SP-CAT-OD protects outdoor-mounted network equipment from damage caused by lightning, power surges, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network equipment using standard 23/24 AWG Cat5e/6/6a cables (sold separately) and the included cable glands. Both mid-span and end-span PoE are supported. Note: two B110-SP-CAT-OD surge protectors are required to protect both source and device.

    Your Last Defense Against Intruding Voltage Spikes That Can Cause Costly Downtime

    Thyristor diode technology features low impedance and superior power handling capabilities, providing protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. Line-to-line and line-to-ground protection modes help protect against short circuits and minimize distortion of high-speed signals. The B110-SP-CAT-OD meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact) and IEC 61000-4-5 (Lightning) 10kA (8/20µs), 20kV (8/20µs).

    IP66 Rating Denotes Resistance to Dust and Water

    The housing's IP66 rating means the surge protector is not only 100% protected against dust, but also able to endure high-pressure jets of water from any direction with no damage or decline in performance. In addition to its water and dust resistance, which keeps it safe in storms and other foul weather, the B110-SP-CAT-OD is shockproof, giving you peace of mind without worrying about the unit being jarred and damaged.

    Ready to Use Right from the Package, So You Can Plug and Play Immediately

    This PoE in-line surge protector meets 802.3af, 802.3at and 802.3bt IEEE standards, supporting up to 90W of DC power (due to power dissipation, powered devices receive 71W) and Ethernet data speeds up to 1 Gbps. No external power supply is required. Rear mounting holes allow for convenient installation where needed, such as high on a wall or pole. The distance between the B110-SP-CAT-OD and the equipment it is protecting should not exceed 328 feet (for best performance, the installation's total cable distance should not exceed 328 feet).

    TAA-Compliant for GSA Schedule Purchases

    The B110-SP-CAT-OD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.


    PRODUCT SPECIFICATIONS
    Receptacles 2 x RJ-45
    Dataline Protection Ethernet
    Power Handling 90 VA
    Height 6.54" (166.12 mm)
    Width 3.15" (80.01 mm)
    Depth 2.76" (70.10 mm)
    Weight (Approximate) 249.5 g
    Package Contents
    • B110-SP-CAT-OD Surge Protector Module
    • Grounding Wire, 18 AWG, 1 ft.
    • 2 x Metric Cable Glands, 8.4 mm
    • 2 x PCBA Mounting Screws
    • 4 x Surface Mounting Screws
    • 4 x Surface Screw Anchors
    • 4 x Unit Cover Screws
    • Owner's Manual
    Country of Origin China
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    • Restriction of Hazardous Substances (RoHS)
    Limited Warranty 2 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.