Tripp Lite series B126-002 2-Port HDMI over Cat5/Cat6 Extender/Splitter - B126-002 - Video Extender Transmitter, Rack-mountable,Wall Mountable,Pole-mountable

Tripp Lite series B126-002 2-Port HDMI over Cat5/Cat6 Extender/Splitter - B126-002 - Video Extender Transmitter, Rack-mountable,Wall Mountable,Pole-mountable

$213.14 $436.98
Availability:
Out of stock
Product Features:
  • Brand: Tripp Lite series
  • Product Type: Video Extender Transmitter
  • Manufacturer Part Number: B126-002
  • Form Factor: Rack-mountable,Wall Mountable,Pole-mountable

  • Marketing Information:

    The B126-002 2-Port HDMI over Cat5/Cat6 Extender/Splitter works with Tripp Lite B126-Series remote receivers to split a single HDMI audio/video signal into two separate signals. It's ideal for digital signs, trade shows, presentations, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source. It uses HDMI cable (see Tripp Lite's P568-Series) to connect to the source and Cat5e/6 cable to transmit to the remote monitors (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

    When used with Tripp Lite's B126-1A0 or B126-1A0-WP-1 active remote receivers, the Extender/Splitter can extend a 1080i (60 Hz) signal up to 200 ft., a 1080p signal (60 Hz) up to 150 ft. and a 3D signal up to 125 ft. With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i (60 Hz) signal up to 100 ft. and a 1080p (60 Hz) signal up to 50 ft. Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.

    In addition to crystal-clear video, the B126-002 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

    Features

    Extends High-Definition Signals

    • Extends a 1080i (60 Hz) signal up to 175 ft., a 1080p (60 Hz) signal up to 125 ft. and a 3D signal up to 100 ft. with each optional Tripp Lite B126-110 remote repeater
    • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft. with Tripp Lite B126-1A0 or B126-1A0-WP-1 active remote receiver
    • Extends a 1080i (60 Hz) signal up to 100 ft. and a 1080p (60 Hz) signal up to 50 ft. with Tripp Lite B126-1P0 or B126-1P0-WP-1 passive remote receiver
    • Add up to 3 remote repeaters on each channel for maximum signal range
    • Connects to next link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)

    Supports the Latest Video and Audio Resolutions

    • Works with all operating systems and HDMI video sources
    • Supports HD resolutions up to 1080p (60 Hz)
    • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio
    • Supports 24-bit True Color (8 bits per channel) and HDCP

    Easy to Set Up and Use

    • Plug-and-play engineering-no software or drivers to download and install
    • Connects quickly to source with HDMI cable, such as Tripp Lite's P568-Series
    • LEDs indicate at a glance when the unit is receiving power and an HDMI signal from the source
    • Included mounting hardware lets you install the unit on a wall, rack or pole

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

    System Requirements

    • For international use, the B110-INT power supply can be purchased separately; it features plugs for the UK, Europe, and Australia

    More from the Manufacturer

Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B126-002
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite series
  • Product Model:B126-002
  • Product Name:B126-002 2-Port HDMI over Cat5/Cat6 Extender/Splitter

  • Marketing Information:

    The B126-002 2-Port HDMI over Cat5/Cat6 Extender/Splitter works with Tripp Lite B126-Series remote receivers to split a single HDMI audio/video signal into two separate signals. It's ideal for digital signs, trade shows, presentations, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source. It uses HDMI cable (see Tripp Lite's P568-Series) to connect to the source and Cat5e/6 cable to transmit to the remote monitors (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

    When used with Tripp Lite's B126-1A0 or B126-1A0-WP-1 active remote receivers, the Extender/Splitter can extend a 1080i (60 Hz) signal up to 200 ft., a 1080p signal (60 Hz) up to 150 ft. and a 3D signal up to 125 ft. With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i (60 Hz) signal up to 100 ft. and a 1080p (60 Hz) signal up to 50 ft. Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.

    In addition to crystal-clear video, the B126-002 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

    Features

    Extends High-Definition Signals

    • Extends a 1080i (60 Hz) signal up to 175 ft., a 1080p (60 Hz) signal up to 125 ft. and a 3D signal up to 100 ft. with each optional Tripp Lite B126-110 remote repeater
    • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft. with Tripp Lite B126-1A0 or B126-1A0-WP-1 active remote receiver
    • Extends a 1080i (60 Hz) signal up to 100 ft. and a 1080p (60 Hz) signal up to 50 ft. with Tripp Lite B126-1P0 or B126-1P0-WP-1 passive remote receiver
    • Add up to 3 remote repeaters on each channel for maximum signal range
    • Connects to next link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)

    Supports the Latest Video and Audio Resolutions

    • Works with all operating systems and HDMI video sources
    • Supports HD resolutions up to 1080p (60 Hz)
    • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio
    • Supports 24-bit True Color (8 bits per channel) and HDCP

    Easy to Set Up and Use

    • Plug-and-play engineering-no software or drivers to download and install
    • Connects quickly to source with HDMI cable, such as Tripp Lite's P568-Series
    • LEDs indicate at a glance when the unit is receiving power and an HDMI signal from the source
    • Included mounting hardware lets you install the unit on a wall, rack or pole

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

    System Requirements

    • For international use, the B110-INT power supply can be purchased separately; it features plugs for the UK, Europe, and Australia

    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Input Devices Supported 1
    Maximum Operating Distance 200 ft (60960 mm)
    Graphics Modes Full HD
    Maximum Video Resolution 1920 x 1080
    Network (RJ-45) Yes
    HDMI In Yes
    Number of Network (RJ-45) Ports 2
    Number of HDMI Inputs 1
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Color Family Black
    Product Color Black
    Transmitter Height 1" (25.40 mm)
    Transmitter Width 2.50" (63.50 mm)
    Transmitter Depth 3.60" (91.44 mm)
    Form Factor
    • Rack-mountable
    • Wall Mountable
    • Pole-mountable
    Package Contents
    • B126-002 Video Extender
    • Mounting Hardware
    • External Power Supply
    • Owner's Manual
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance Restriction of Hazardous Substances (RoHS)
    Limited Warranty 1 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite series
    • Product Type: Video Extender Transmitter
    • Manufacturer Part Number: B126-002
    • Form Factor: Rack-mountable,Wall Mountable,Pole-mountable

    • Marketing Information:

      The B126-002 2-Port HDMI over Cat5/Cat6 Extender/Splitter works with Tripp Lite B126-Series remote receivers to split a single HDMI audio/video signal into two separate signals. It's ideal for digital signs, trade shows, presentations, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source. It uses HDMI cable (see Tripp Lite's P568-Series) to connect to the source and Cat5e/6 cable to transmit to the remote monitors (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

      When used with Tripp Lite's B126-1A0 or B126-1A0-WP-1 active remote receivers, the Extender/Splitter can extend a 1080i (60 Hz) signal up to 200 ft., a 1080p signal (60 Hz) up to 150 ft. and a 3D signal up to 125 ft. With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i (60 Hz) signal up to 100 ft. and a 1080p (60 Hz) signal up to 50 ft. Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.

      In addition to crystal-clear video, the B126-002 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

      Features

      Extends High-Definition Signals

      • Extends a 1080i (60 Hz) signal up to 175 ft., a 1080p (60 Hz) signal up to 125 ft. and a 3D signal up to 100 ft. with each optional Tripp Lite B126-110 remote repeater
      • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft. with Tripp Lite B126-1A0 or B126-1A0-WP-1 active remote receiver
      • Extends a 1080i (60 Hz) signal up to 100 ft. and a 1080p (60 Hz) signal up to 50 ft. with Tripp Lite B126-1P0 or B126-1P0-WP-1 passive remote receiver
      • Add up to 3 remote repeaters on each channel for maximum signal range
      • Connects to next link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)

      Supports the Latest Video and Audio Resolutions

      • Works with all operating systems and HDMI video sources
      • Supports HD resolutions up to 1080p (60 Hz)
      • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio
      • Supports 24-bit True Color (8 bits per channel) and HDCP

      Easy to Set Up and Use

      • Plug-and-play engineering-no software or drivers to download and install
      • Connects quickly to source with HDMI cable, such as Tripp Lite's P568-Series
      • LEDs indicate at a glance when the unit is receiving power and an HDMI signal from the source
      • Included mounting hardware lets you install the unit on a wall, rack or pole

      TAA-Compliant

      • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

      System Requirements

      • For international use, the B110-INT power supply can be purchased separately; it features plugs for the UK, Europe, and Australia

      More from the Manufacturer

    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B126-002
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite series
  • Product Model:B126-002
  • Product Name:B126-002 2-Port HDMI over Cat5/Cat6 Extender/Splitter

  • Marketing Information:

    The B126-002 2-Port HDMI over Cat5/Cat6 Extender/Splitter works with Tripp Lite B126-Series remote receivers to split a single HDMI audio/video signal into two separate signals. It's ideal for digital signs, trade shows, presentations, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source. It uses HDMI cable (see Tripp Lite's P568-Series) to connect to the source and Cat5e/6 cable to transmit to the remote monitors (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

    When used with Tripp Lite's B126-1A0 or B126-1A0-WP-1 active remote receivers, the Extender/Splitter can extend a 1080i (60 Hz) signal up to 200 ft., a 1080p signal (60 Hz) up to 150 ft. and a 3D signal up to 125 ft. With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i (60 Hz) signal up to 100 ft. and a 1080p (60 Hz) signal up to 50 ft. Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.

    In addition to crystal-clear video, the B126-002 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

    Features

    Extends High-Definition Signals

    • Extends a 1080i (60 Hz) signal up to 175 ft., a 1080p (60 Hz) signal up to 125 ft. and a 3D signal up to 100 ft. with each optional Tripp Lite B126-110 remote repeater
    • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft. with Tripp Lite B126-1A0 or B126-1A0-WP-1 active remote receiver
    • Extends a 1080i (60 Hz) signal up to 100 ft. and a 1080p (60 Hz) signal up to 50 ft. with Tripp Lite B126-1P0 or B126-1P0-WP-1 passive remote receiver
    • Add up to 3 remote repeaters on each channel for maximum signal range
    • Connects to next link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)

    Supports the Latest Video and Audio Resolutions

    • Works with all operating systems and HDMI video sources
    • Supports HD resolutions up to 1080p (60 Hz)
    • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio
    • Supports 24-bit True Color (8 bits per channel) and HDCP

    Easy to Set Up and Use

    • Plug-and-play engineering-no software or drivers to download and install
    • Connects quickly to source with HDMI cable, such as Tripp Lite's P568-Series
    • LEDs indicate at a glance when the unit is receiving power and an HDMI signal from the source
    • Included mounting hardware lets you install the unit on a wall, rack or pole

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

    System Requirements

    • For international use, the B110-INT power supply can be purchased separately; it features plugs for the UK, Europe, and Australia

    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Input Devices Supported 1
    Maximum Operating Distance 200 ft (60960 mm)
    Graphics Modes Full HD
    Maximum Video Resolution 1920 x 1080
    Network (RJ-45) Yes
    HDMI In Yes
    Number of Network (RJ-45) Ports 2
    Number of HDMI Inputs 1
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Color Family Black
    Product Color Black
    Transmitter Height 1" (25.40 mm)
    Transmitter Width 2.50" (63.50 mm)
    Transmitter Depth 3.60" (91.44 mm)
    Form Factor
    • Rack-mountable
    • Wall Mountable
    • Pole-mountable
    Package Contents
    • B126-002 Video Extender
    • Mounting Hardware
    • External Power Supply
    • Owner's Manual
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance Restriction of Hazardous Substances (RoHS)
    Limited Warranty 1 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.