Tripp Lite by Eaton B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver - B126-2A0 - Video Extender Receiver, Rack-mountable,Wall Mountable,Pole-mountable

Tripp Lite by Eaton B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver - B126-2A0 - Video Extender Receiver, Rack-mountable,Wall Mountable,Pole-mountable

$246.05 $504.44
Availability:
Out of stock
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Video Extender Receiver
  • Manufacturer Part Number: B126-2A0
  • Form Factor: Rack-mountable,Wall Mountable,Pole-mountable

  • Marketing Information: The B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite's B126-002 or B126-004 transmitter to extend an HDMI signal and split it to two projectors, monitors or televisions. It's ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

    The receiver uses HDMI cable (see Tripp Lite's P568-Series) to connect to the monitors and Cat5e/6 cable to receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

    The B126-2A0 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain for a maximum of six HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet (3D).

    In addition to crystal-clear video, the B126-2A0 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

    Features

    Extends High-Definition Signals

    • Works in tandem with Tripp Lite's B126-002 or B126-004 transmitter unit
    • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft.
    • Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700 feet (1080i), 500 feet (1080p) and 400 feet (3D)
    • Connects to previous link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)

    Supports the Latest Video and Audio Resolutions

    • Works with all operating systems and HDMI video sources
    • Supports HD resolutions up to 1080p (60 Hz)
    • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter
    • Supports 24-bit True Color (8 bits per channel) and HDCP
    • Built-in equalization control lets you adjust the image on the local monitor

    Easy to Set Up and Use

    • Plug-and-play engineering-no software or drivers to download and install
    • Connects quickly to monitors with HDMI cable, such as Tripp Lite's P568-Series
    • LEDs indicate at a glance when the unit is receiving power and a signal from the previous link in the chain
    • Included mounting hardware lets you install the unit on a wall, rack or pole

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

    More from the Manufacturer

Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B126-2A0
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:B126-2A0
  • Product Name:B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver

  • Marketing Information:The B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite's B126-002 or B126-004 transmitter to extend an HDMI signal and split it to two projectors, monitors or televisions. It's ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

    The receiver uses HDMI cable (see Tripp Lite's P568-Series) to connect to the monitors and Cat5e/6 cable to receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

    The B126-2A0 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain for a maximum of six HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet (3D).

    In addition to crystal-clear video, the B126-2A0 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

    Features

    Extends High-Definition Signals

    • Works in tandem with Tripp Lite's B126-002 or B126-004 transmitter unit
    • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft.
    • Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700 feet (1080i), 500 feet (1080p) and 400 feet (3D)
    • Connects to previous link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)

    Supports the Latest Video and Audio Resolutions

    • Works with all operating systems and HDMI video sources
    • Supports HD resolutions up to 1080p (60 Hz)
    • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter
    • Supports 24-bit True Color (8 bits per channel) and HDCP
    • Built-in equalization control lets you adjust the image on the local monitor

    Easy to Set Up and Use

    • Plug-and-play engineering-no software or drivers to download and install
    • Connects quickly to monitors with HDMI cable, such as Tripp Lite's P568-Series
    • LEDs indicate at a glance when the unit is receiving power and a signal from the previous link in the chain
    • Included mounting hardware lets you install the unit on a wall, rack or pole

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

    More from the Manufacturer


    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Output Devices Supported 2
    Maximum Operating Distance 200 ft (60960 mm)
    Graphics Modes Full HD
    Maximum Video Resolution 1920 x 1080
    Network (RJ-45) Yes
    HDMI Out Yes
    Number of Network (RJ-45) Ports 1
    Number of HDMI Outputs 2
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Color Family Black
    Product Color Black
    Receiver Height 1" (25.40 mm)
    Receiver Width 2.50" (63.50 mm)
    Receiver Depth 3.60" (91.44 mm)
    Form Factor
    • Rack-mountable
    • Wall Mountable
    • Pole-mountable
    For Country/Region
    • Europe
    • United Kingdom
    Package Contents
    • HDMI Over Cat5 Active Extender 2-Port Remote Unit
    • Screwdriver For Adjustment Of Equalization
    • Mounting Hardware
    • External Power Supply (Input: 100-240V)
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance Restriction of Hazardous Substances (RoHS)
    Limited Warranty 1 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Video Extender Receiver
    • Manufacturer Part Number: B126-2A0
    • Form Factor: Rack-mountable,Wall Mountable,Pole-mountable

    • Marketing Information: The B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite's B126-002 or B126-004 transmitter to extend an HDMI signal and split it to two projectors, monitors or televisions. It's ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

      The receiver uses HDMI cable (see Tripp Lite's P568-Series) to connect to the monitors and Cat5e/6 cable to receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

      The B126-2A0 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain for a maximum of six HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet (3D).

      In addition to crystal-clear video, the B126-2A0 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

      Features

      Extends High-Definition Signals

      • Works in tandem with Tripp Lite's B126-002 or B126-004 transmitter unit
      • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft.
      • Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700 feet (1080i), 500 feet (1080p) and 400 feet (3D)
      • Connects to previous link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)

      Supports the Latest Video and Audio Resolutions

      • Works with all operating systems and HDMI video sources
      • Supports HD resolutions up to 1080p (60 Hz)
      • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter
      • Supports 24-bit True Color (8 bits per channel) and HDCP
      • Built-in equalization control lets you adjust the image on the local monitor

      Easy to Set Up and Use

      • Plug-and-play engineering-no software or drivers to download and install
      • Connects quickly to monitors with HDMI cable, such as Tripp Lite's P568-Series
      • LEDs indicate at a glance when the unit is receiving power and a signal from the previous link in the chain
      • Included mounting hardware lets you install the unit on a wall, rack or pole

      TAA-Compliant

      • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

      More from the Manufacturer

    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B126-2A0
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:B126-2A0
  • Product Name:B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver

  • Marketing Information:The B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite's B126-002 or B126-004 transmitter to extend an HDMI signal and split it to two projectors, monitors or televisions. It's ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

    The receiver uses HDMI cable (see Tripp Lite's P568-Series) to connect to the monitors and Cat5e/6 cable to receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

    The B126-2A0 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain for a maximum of six HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet (3D).

    In addition to crystal-clear video, the B126-2A0 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

    Features

    Extends High-Definition Signals

    • Works in tandem with Tripp Lite's B126-002 or B126-004 transmitter unit
    • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft.
    • Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700 feet (1080i), 500 feet (1080p) and 400 feet (3D)
    • Connects to previous link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)

    Supports the Latest Video and Audio Resolutions

    • Works with all operating systems and HDMI video sources
    • Supports HD resolutions up to 1080p (60 Hz)
    • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter
    • Supports 24-bit True Color (8 bits per channel) and HDCP
    • Built-in equalization control lets you adjust the image on the local monitor

    Easy to Set Up and Use

    • Plug-and-play engineering-no software or drivers to download and install
    • Connects quickly to monitors with HDMI cable, such as Tripp Lite's P568-Series
    • LEDs indicate at a glance when the unit is receiving power and a signal from the previous link in the chain
    • Included mounting hardware lets you install the unit on a wall, rack or pole

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

    More from the Manufacturer


    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Output Devices Supported 2
    Maximum Operating Distance 200 ft (60960 mm)
    Graphics Modes Full HD
    Maximum Video Resolution 1920 x 1080
    Network (RJ-45) Yes
    HDMI Out Yes
    Number of Network (RJ-45) Ports 1
    Number of HDMI Outputs 2
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Color Family Black
    Product Color Black
    Receiver Height 1" (25.40 mm)
    Receiver Width 2.50" (63.50 mm)
    Receiver Depth 3.60" (91.44 mm)
    Form Factor
    • Rack-mountable
    • Wall Mountable
    • Pole-mountable
    For Country/Region
    • Europe
    • United Kingdom
    Package Contents
    • HDMI Over Cat5 Active Extender 2-Port Remote Unit
    • Screwdriver For Adjustment Of Equalization
    • Mounting Hardware
    • External Power Supply (Input: 100-240V)
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance Restriction of Hazardous Substances (RoHS)
    Limited Warranty 1 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.