Tripp Lite by Eaton B127A-1A1-BHFH Video Extender Transmitter/Receiver - B127A-1A1-BHFH - Video Extender Transmitter/Receiver, Wall Plate

Tripp Lite by Eaton B127A-1A1-BHFH Video Extender Transmitter/Receiver - B127A-1A1-BHFH - Video Extender Transmitter/Receiver, Wall Plate

$223.52 $458.25
Availability:
Out of stock
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Video Extender Transmitter/Receiver
  • Manufacturer Part Number: B127A-1A1-BHFH
  • Form Factor: Wall Plate

  • Marketing Information:

    Features | HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
    This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The metal transmitter box and the single-gang metal wall plate receiver with metal back cover blend perfectly into the room décor.

    Extends a 4K A/V Transmission up to 230 ft....or Even Farther
    The B127A-1A1-BHFH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. Bi-directional IR remote control lets you operate the source from the display end of the installation. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).

    Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
    The B127A-1A1-BHFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with 7.1-channel surround sound. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization automatically fine-tunes the image quality at the remote display.

    Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
    To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

    Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
    After you connect the included external power supply to the transmitter, Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to install the receiver where best needed without worrying about finding a nearby AC outlet.

    Plug-and-Play Operation for Quick Setup and Immediate Use
    The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the receiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). Mounting hardware is included for both units.

    TAA-Compliant for GSA Schedule Purchases
    The B127A-1A1-BHFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

    Typical Applications

    • Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
    • Gain flexibility in where the receiver is installed, with the freedom to install it away from an AC outlet
Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B127A-1A1-BHFH
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:B127A-1A1-BHFH
  • Product Name:B127A-1A1-BHFH Video Extender Transmitter/Receiver

  • Marketing Information:

    Features | HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
    This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The metal transmitter box and the single-gang metal wall plate receiver with metal back cover blend perfectly into the room décor.

    Extends a 4K A/V Transmission up to 230 ft....or Even Farther
    The B127A-1A1-BHFH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. Bi-directional IR remote control lets you operate the source from the display end of the installation. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).

    Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
    The B127A-1A1-BHFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with 7.1-channel surround sound. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization automatically fine-tunes the image quality at the remote display.

    Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
    To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

    Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
    After you connect the included external power supply to the transmitter, Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to install the receiver where best needed without worrying about finding a nearby AC outlet.

    Plug-and-Play Operation for Quick Setup and Immediate Use
    The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the receiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). Mounting hardware is included for both units.

    TAA-Compliant for GSA Schedule Purchases
    The B127A-1A1-BHFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

    Typical Applications

    • Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
    • Gain flexibility in where the receiver is installed, with the freedom to install it away from an AC outlet

    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Input Devices Supported 1
    Number of Output Devices Supported 1
    Maximum Operating Distance 230 ft (70104 mm)
    Graphics Modes 4K UHD
    Maximum Video Resolution 3840 x 2160
    Network (RJ-45) Yes
    HDMI In Yes
    HDMI Out Yes
    Number of Network (RJ-45) Ports 2
    Number of HDMI Inputs 1
    Number of HDMI Outputs 1
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Frequency
    • 50 Hz
    • 60 Hz
    Product Color White/Black
    Transmitter Height 1.06" (27 mm)
    Transmitter Width 4.53" (115 mm)
    Transmitter Depth 2.46" (62.40 mm)
    Receiver Height 4.53" (115 mm)
    Receiver Width 2.76" (70 mm)
    Receiver Depth 1.33" (33.82 mm)
    Form Factor Wall Plate
    Transmitter Weight (Approximate) 648.6 g
    Receiver Weight (Approximate) 648.6 g
    Package Contents
    • 1 x Box transmitter
    • 1 x Wall plate receiver
    • External power supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A)
    • 4 x International plug adapters (North America, Europe, U.K. and Australia)
    • IR-In cable
    • IR-Out cable
    • Mounting Hardware
    • Owner's Manual
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance
    • Restriction of Hazardous Substances (RoHS)
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    Limited Warranty 1 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Video Extender Transmitter/Receiver
    • Manufacturer Part Number: B127A-1A1-BHFH
    • Form Factor: Wall Plate

    • Marketing Information:

      Features | HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
      This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The metal transmitter box and the single-gang metal wall plate receiver with metal back cover blend perfectly into the room décor.

      Extends a 4K A/V Transmission up to 230 ft....or Even Farther
      The B127A-1A1-BHFH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. Bi-directional IR remote control lets you operate the source from the display end of the installation. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).

      Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
      The B127A-1A1-BHFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with 7.1-channel surround sound. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization automatically fine-tunes the image quality at the remote display.

      Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
      To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

      Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
      After you connect the included external power supply to the transmitter, Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to install the receiver where best needed without worrying about finding a nearby AC outlet.

      Plug-and-Play Operation for Quick Setup and Immediate Use
      The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the receiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). Mounting hardware is included for both units.

      TAA-Compliant for GSA Schedule Purchases
      The B127A-1A1-BHFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

      Typical Applications

      • Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
      • Gain flexibility in where the receiver is installed, with the freedom to install it away from an AC outlet
    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B127A-1A1-BHFH
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:B127A-1A1-BHFH
  • Product Name:B127A-1A1-BHFH Video Extender Transmitter/Receiver

  • Marketing Information:

    Features | HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
    This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The metal transmitter box and the single-gang metal wall plate receiver with metal back cover blend perfectly into the room décor.

    Extends a 4K A/V Transmission up to 230 ft....or Even Farther
    The B127A-1A1-BHFH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. Bi-directional IR remote control lets you operate the source from the display end of the installation. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).

    Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
    The B127A-1A1-BHFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with 7.1-channel surround sound. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization automatically fine-tunes the image quality at the remote display.

    Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
    To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

    Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
    After you connect the included external power supply to the transmitter, Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to install the receiver where best needed without worrying about finding a nearby AC outlet.

    Plug-and-Play Operation for Quick Setup and Immediate Use
    The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the receiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). Mounting hardware is included for both units.

    TAA-Compliant for GSA Schedule Purchases
    The B127A-1A1-BHFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

    Typical Applications

    • Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
    • Gain flexibility in where the receiver is installed, with the freedom to install it away from an AC outlet

    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Input Devices Supported 1
    Number of Output Devices Supported 1
    Maximum Operating Distance 230 ft (70104 mm)
    Graphics Modes 4K UHD
    Maximum Video Resolution 3840 x 2160
    Network (RJ-45) Yes
    HDMI In Yes
    HDMI Out Yes
    Number of Network (RJ-45) Ports 2
    Number of HDMI Inputs 1
    Number of HDMI Outputs 1
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Frequency
    • 50 Hz
    • 60 Hz
    Product Color White/Black
    Transmitter Height 1.06" (27 mm)
    Transmitter Width 4.53" (115 mm)
    Transmitter Depth 2.46" (62.40 mm)
    Receiver Height 4.53" (115 mm)
    Receiver Width 2.76" (70 mm)
    Receiver Depth 1.33" (33.82 mm)
    Form Factor Wall Plate
    Transmitter Weight (Approximate) 648.6 g
    Receiver Weight (Approximate) 648.6 g
    Package Contents
    • 1 x Box transmitter
    • 1 x Wall plate receiver
    • External power supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A)
    • 4 x International plug adapters (North America, Europe, U.K. and Australia)
    • IR-In cable
    • IR-Out cable
    • Mounting Hardware
    • Owner's Manual
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance
    • Restriction of Hazardous Substances (RoHS)
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    Limited Warranty 1 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.