Tripp Lite Medical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1 - N234-MI-1005 - Medical Ethernet Isolator

Tripp Lite Medical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1 - N234-MI-1005 - Medical Ethernet Isolator

$259.99 $895.30
Availability:
Out of stock
Product type:
Vendor:
Product Features:
  • Brand: Tripp Lite
  • Product Type: Medical Ethernet Isolator
  • Manufacturer Part Number: N234-MI-1005

  • Marketing Information:

    Features

    Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety

    Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.

    Comply with IEC 60601-1 for Use in the Patient Care Vicinity

    The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic's network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)

    Install In-Line on an Ethernet Network

    This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.

    Comply with TAA Requirements

    The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

    One-Year Warranty

    The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.

    Typical Applications

    • Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities
    • Connect an EMG measuring station with an analysis computer in a doctor's consulting room
    • Connect the PC of a prolonged EEG system to a clinic's network

    System Requirements

    • Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
    • Cat6 network cable

    Package Includes

    • N234-MI-1005 Medical Ethernet Isolator - For Patient Care Vicinity
    • Owner's manual
Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:N234-MI-1005
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite
  • Product Model:N234-MI-1005
  • Product Name:Medical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1

  • Marketing Information:

    Features

    Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety

    Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.

    Comply with IEC 60601-1 for Use in the Patient Care Vicinity

    The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic's network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)

    Install In-Line on an Ethernet Network

    This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.

    Comply with TAA Requirements

    The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

    One-Year Warranty

    The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.

    Typical Applications

    • Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities
    • Connect an EMG measuring station with an analysis computer in a doctor's consulting room
    • Connect the PC of a prolonged EEG system to a clinic's network

    System Requirements

    • Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
    • Cat6 network cable

    Package Includes

    • N234-MI-1005 Medical Ethernet Isolator - For Patient Care Vicinity
    • Owner's manual

    PRODUCT SPECIFICATIONS
    Product Color Gray
    Weight (Approximate) 50 g
    Package Contents
    • Medical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1
    • Owner's manual
    Application/Usage Network
    Environmentally Friendly Yes
    Country of Origin Germany
    TAA Compliant Yes
    Limited Warranty 1 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite
    • Product Type: Medical Ethernet Isolator
    • Manufacturer Part Number: N234-MI-1005

    • Marketing Information:

      Features

      Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety

      Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.

      Comply with IEC 60601-1 for Use in the Patient Care Vicinity

      The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic's network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)

      Install In-Line on an Ethernet Network

      This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.

      Comply with TAA Requirements

      The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

      One-Year Warranty

      The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.

      Typical Applications

      • Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities
      • Connect an EMG measuring station with an analysis computer in a doctor's consulting room
      • Connect the PC of a prolonged EEG system to a clinic's network

      System Requirements

      • Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
      • Cat6 network cable

      Package Includes

      • N234-MI-1005 Medical Ethernet Isolator - For Patient Care Vicinity
      • Owner's manual
    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:N234-MI-1005
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite
  • Product Model:N234-MI-1005
  • Product Name:Medical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1

  • Marketing Information:

    Features

    Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety

    Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.

    Comply with IEC 60601-1 for Use in the Patient Care Vicinity

    The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic's network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)

    Install In-Line on an Ethernet Network

    This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.

    Comply with TAA Requirements

    The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

    One-Year Warranty

    The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.

    Typical Applications

    • Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities
    • Connect an EMG measuring station with an analysis computer in a doctor's consulting room
    • Connect the PC of a prolonged EEG system to a clinic's network

    System Requirements

    • Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
    • Cat6 network cable

    Package Includes

    • N234-MI-1005 Medical Ethernet Isolator - For Patient Care Vicinity
    • Owner's manual

    PRODUCT SPECIFICATIONS
    Product Color Gray
    Weight (Approximate) 50 g
    Package Contents
    • Medical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1
    • Owner's manual
    Application/Usage Network
    Environmentally Friendly Yes
    Country of Origin Germany
    TAA Compliant Yes
    Limited Warranty 1 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.