Tripp Lite by Eaton N785-INT-LC-MM Transceivers/Media Converter - N785-INT-LC-MM - Transceiver/Media Converter

Tripp Lite by Eaton N785-INT-LC-MM Transceivers/Media Converter - N785-INT-LC-MM - Transceiver/Media Converter

$272.02 $557.67
Availability:
Out of stock
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Transceiver/Media Converter
  • Manufacturer Part Number: N785-INT-LC-MM

  • Marketing Information:

    The economical N785-INT-LC-MM Gigabit Multimode Fiber to Ethernet Media Converter allows you to extend your 10/100/1000 Mbps Ethernet connection up to 550 meters (1,804 feet) without the limitations of extra Cat5e/6 UTP cabling. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to use LC multimode fiber optic cabling for greater distances.
    Use copper UTP cabling to connect one 850 nm N785-INT-LC-MM converter to your network device, such as a computer, and another converter to a network switch. The two converters are connected by a multimode fiber optic cable with LC connectors. The N785-INT-LC-MM supports 50/125 multimode cable up to 550 meters and 62.5/125 multimode cable up to 400 meters.
    Monitoring and controlling your network nodes is easy with the converter's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration. Six LEDs indicate the converter's Ethernet network and fiber link status at a glance.
    The N785-INT-LC-MM includes an external power supply with international plug adapters for North America (NEMA 5-15P), the United Kingdom (BS 1363), Europe (CEE 7/16 Schuko) and Australia (AS/NZS 3112). The plug-and-play fiber-to-copper media converter requires no software or drivers and is easy to set up.

    Features

    Extends a Gigabit Ethernet Signal up to 550 m (1,804 ft.) Using LC Multimode Cable

    • Converts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speed
    • Fiber optic technology more effective than Cat5e/6 over long distances
    • Supports 50/125 multimode fiber optic cabling up to 550 m
    • Supports 62.5/125 multimode fiber optic cabling up to 400 m
    • Connection requires an N785-INT-LC-MM at both ends

    Advanced Monitoring and Control

    • Supports automatic sensing of network speed
    • Supports both full-duplex and half-duplex operation
    • Supports automatic MDI/MDI-X configuration
    • 6 LEDs indicate network and fiber link status at a glance

    Plug-and-Play Operation

    • No additional software or drivers required
    • Compact unit sets up in minutes
    • Durable metal housing designed to last
    • Power supply includes international plug adapters for North America, U.K., Europe and Australia
Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:N785-INT-LC-MM
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:N785-INT-LC-MM
  • Product Name:N785-INT-LC-MM Transceivers/Media Converter

  • Marketing Information:

    The economical N785-INT-LC-MM Gigabit Multimode Fiber to Ethernet Media Converter allows you to extend your 10/100/1000 Mbps Ethernet connection up to 550 meters (1,804 feet) without the limitations of extra Cat5e/6 UTP cabling. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to use LC multimode fiber optic cabling for greater distances.
    Use copper UTP cabling to connect one 850 nm N785-INT-LC-MM converter to your network device, such as a computer, and another converter to a network switch. The two converters are connected by a multimode fiber optic cable with LC connectors. The N785-INT-LC-MM supports 50/125 multimode cable up to 550 meters and 62.5/125 multimode cable up to 400 meters.
    Monitoring and controlling your network nodes is easy with the converter's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration. Six LEDs indicate the converter's Ethernet network and fiber link status at a glance.
    The N785-INT-LC-MM includes an external power supply with international plug adapters for North America (NEMA 5-15P), the United Kingdom (BS 1363), Europe (CEE 7/16 Schuko) and Australia (AS/NZS 3112). The plug-and-play fiber-to-copper media converter requires no software or drivers and is easy to set up.

    Features

    Extends a Gigabit Ethernet Signal up to 550 m (1,804 ft.) Using LC Multimode Cable

    • Converts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speed
    • Fiber optic technology more effective than Cat5e/6 over long distances
    • Supports 50/125 multimode fiber optic cabling up to 550 m
    • Supports 62.5/125 multimode fiber optic cabling up to 400 m
    • Connection requires an N785-INT-LC-MM at both ends

    Advanced Monitoring and Control

    • Supports automatic sensing of network speed
    • Supports both full-duplex and half-duplex operation
    • Supports automatic MDI/MDI-X configuration
    • 6 LEDs indicate network and fiber link status at a glance

    Plug-and-Play Operation

    • No additional software or drivers required
    • Compact unit sets up in minutes
    • Durable metal housing designed to last
    • Power supply includes international plug adapters for North America, U.K., Europe and Australia

    PRODUCT SPECIFICATIONS
    Total Number of Ports 2
    Network (RJ-45) Yes
    Number of LC Ports 1
    LC Port Type Duplex
    Number of Network (RJ-45) Ports 1
    Media Type Supported
    • Twisted Pair
    • Optical Fiber
    Fiber Mode Supported Multi-mode
    Fiber Optic Wavelength 850 nm
    Maximum Distance Supported 0.55 km
    Fiber Optic Cable Core/Cladding Specification
    • 50/125 µm
    • 62.5/125 µm
    Ethernet Technology Gigabit Ethernet
    Network Technology 10/100/1000Base-T
    Power Source AC Adapter
    Height 2.54" (64.52 mm)
    Width 11.94" (303.28 mm)
    Depth 6.99" (177.55 mm)
    Weight (Approximate) 204.1 g
    Country of Origin China
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Transceiver/Media Converter
    • Manufacturer Part Number: N785-INT-LC-MM

    • Marketing Information:

      The economical N785-INT-LC-MM Gigabit Multimode Fiber to Ethernet Media Converter allows you to extend your 10/100/1000 Mbps Ethernet connection up to 550 meters (1,804 feet) without the limitations of extra Cat5e/6 UTP cabling. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to use LC multimode fiber optic cabling for greater distances.
      Use copper UTP cabling to connect one 850 nm N785-INT-LC-MM converter to your network device, such as a computer, and another converter to a network switch. The two converters are connected by a multimode fiber optic cable with LC connectors. The N785-INT-LC-MM supports 50/125 multimode cable up to 550 meters and 62.5/125 multimode cable up to 400 meters.
      Monitoring and controlling your network nodes is easy with the converter's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration. Six LEDs indicate the converter's Ethernet network and fiber link status at a glance.
      The N785-INT-LC-MM includes an external power supply with international plug adapters for North America (NEMA 5-15P), the United Kingdom (BS 1363), Europe (CEE 7/16 Schuko) and Australia (AS/NZS 3112). The plug-and-play fiber-to-copper media converter requires no software or drivers and is easy to set up.

      Features

      Extends a Gigabit Ethernet Signal up to 550 m (1,804 ft.) Using LC Multimode Cable

      • Converts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speed
      • Fiber optic technology more effective than Cat5e/6 over long distances
      • Supports 50/125 multimode fiber optic cabling up to 550 m
      • Supports 62.5/125 multimode fiber optic cabling up to 400 m
      • Connection requires an N785-INT-LC-MM at both ends

      Advanced Monitoring and Control

      • Supports automatic sensing of network speed
      • Supports both full-duplex and half-duplex operation
      • Supports automatic MDI/MDI-X configuration
      • 6 LEDs indicate network and fiber link status at a glance

      Plug-and-Play Operation

      • No additional software or drivers required
      • Compact unit sets up in minutes
      • Durable metal housing designed to last
      • Power supply includes international plug adapters for North America, U.K., Europe and Australia
    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:N785-INT-LC-MM
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:N785-INT-LC-MM
  • Product Name:N785-INT-LC-MM Transceivers/Media Converter

  • Marketing Information:

    The economical N785-INT-LC-MM Gigabit Multimode Fiber to Ethernet Media Converter allows you to extend your 10/100/1000 Mbps Ethernet connection up to 550 meters (1,804 feet) without the limitations of extra Cat5e/6 UTP cabling. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to use LC multimode fiber optic cabling for greater distances.
    Use copper UTP cabling to connect one 850 nm N785-INT-LC-MM converter to your network device, such as a computer, and another converter to a network switch. The two converters are connected by a multimode fiber optic cable with LC connectors. The N785-INT-LC-MM supports 50/125 multimode cable up to 550 meters and 62.5/125 multimode cable up to 400 meters.
    Monitoring and controlling your network nodes is easy with the converter's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration. Six LEDs indicate the converter's Ethernet network and fiber link status at a glance.
    The N785-INT-LC-MM includes an external power supply with international plug adapters for North America (NEMA 5-15P), the United Kingdom (BS 1363), Europe (CEE 7/16 Schuko) and Australia (AS/NZS 3112). The plug-and-play fiber-to-copper media converter requires no software or drivers and is easy to set up.

    Features

    Extends a Gigabit Ethernet Signal up to 550 m (1,804 ft.) Using LC Multimode Cable

    • Converts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speed
    • Fiber optic technology more effective than Cat5e/6 over long distances
    • Supports 50/125 multimode fiber optic cabling up to 550 m
    • Supports 62.5/125 multimode fiber optic cabling up to 400 m
    • Connection requires an N785-INT-LC-MM at both ends

    Advanced Monitoring and Control

    • Supports automatic sensing of network speed
    • Supports both full-duplex and half-duplex operation
    • Supports automatic MDI/MDI-X configuration
    • 6 LEDs indicate network and fiber link status at a glance

    Plug-and-Play Operation

    • No additional software or drivers required
    • Compact unit sets up in minutes
    • Durable metal housing designed to last
    • Power supply includes international plug adapters for North America, U.K., Europe and Australia

    PRODUCT SPECIFICATIONS
    Total Number of Ports 2
    Network (RJ-45) Yes
    Number of LC Ports 1
    LC Port Type Duplex
    Number of Network (RJ-45) Ports 1
    Media Type Supported
    • Twisted Pair
    • Optical Fiber
    Fiber Mode Supported Multi-mode
    Fiber Optic Wavelength 850 nm
    Maximum Distance Supported 0.55 km
    Fiber Optic Cable Core/Cladding Specification
    • 50/125 µm
    • 62.5/125 µm
    Ethernet Technology Gigabit Ethernet
    Network Technology 10/100/1000Base-T
    Power Source AC Adapter
    Height 2.54" (64.52 mm)
    Width 11.94" (303.28 mm)
    Depth 6.99" (177.55 mm)
    Weight (Approximate) 204.1 g
    Country of Origin China
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.