Tripp Lite by Eaton NPOE-30W-1G PoE Injector - NPOE-30W-1G - PoE Injector, 120 V AC,230 V AC, Desktop

Tripp Lite by Eaton NPOE-30W-1G PoE Injector - NPOE-30W-1G - PoE Injector, 120 V AC,230 V AC, Desktop

$58.27 $120.26
Availability:
Out of stock
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: PoE Injector
  • Manufacturer Part Number: NPOE-30W-1G
  • Input Voltage: 120 V AC,230 V AC
  • Form Factor: Desktop

  • Marketing Information:

    Adds PoE Devices to Your LAN Without a PoE Switch

    Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.

    Saves You Time and Money on Unnecessary Equipment Updates

    This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.

    Expand Your Wireless Network Up to 328 ft.

    The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges.

    Simple Plug-and-Play Installation Has Your Device Connected in Minutes

    No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data.

    Designed for Installation Almost Anywhere

    Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

    3-Year Warranty and Environmentally Responsible Design

    The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility.

    More from the Manufacturer

Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:NPOE-30W-1G
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:NPOE-30W-1G
  • Product Name:NPOE-30W-1G PoE Injector

  • Marketing Information:

    Adds PoE Devices to Your LAN Without a PoE Switch

    Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.

    Saves You Time and Money on Unnecessary Equipment Updates

    This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.

    Expand Your Wireless Network Up to 328 ft.

    The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges.

    Simple Plug-and-Play Installation Has Your Device Connected in Minutes

    No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data.

    Designed for Installation Almost Anywhere

    Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

    3-Year Warranty and Environmentally Responsible Design

    The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility.


    PRODUCT SPECIFICATIONS
    Input Voltage
    • 120 V AC
    • 230 V AC
    Minimum Frequency 50 Hz
    Maximum Frequency 60 Hz
    Input Ports Ethernet
    Output Ports Ethernet
    Color Family Black
    Product Color Black
    Form Factor Desktop
    Mount Type Surface-mountable
    Package Contents
    • NPOE-30W-1G PoE Injector
    • Detachable C13 to NEMA 5-15P power cord, 6 ft.
    • Owner's manual
    • Green Initiatives
    Certifications & Standards
    • CE
    • FCC
    • UL
    IEEE Standards Supported
    • 803.3
    • 802.3ab
    • 802.3af
    • 802.3at
    • 802.3u

    Environmentally Friendly Yes
    Environmental Compliance
    • Restriction of Hazardous Substances (RoHS)
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    • Waste Electrical and Electronic Equipment Directive (WEEE)
    Country of Origin China
    Limited Warranty 3 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: PoE Injector
    • Manufacturer Part Number: NPOE-30W-1G
    • Input Voltage: 120 V AC,230 V AC
    • Form Factor: Desktop

    • Marketing Information:

      Adds PoE Devices to Your LAN Without a PoE Switch

      Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.

      Saves You Time and Money on Unnecessary Equipment Updates

      This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.

      Expand Your Wireless Network Up to 328 ft.

      The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges.

      Simple Plug-and-Play Installation Has Your Device Connected in Minutes

      No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data.

      Designed for Installation Almost Anywhere

      Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

      3-Year Warranty and Environmentally Responsible Design

      The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility.

      More from the Manufacturer

    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:NPOE-30W-1G
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:NPOE-30W-1G
  • Product Name:NPOE-30W-1G PoE Injector

  • Marketing Information:

    Adds PoE Devices to Your LAN Without a PoE Switch

    Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.

    Saves You Time and Money on Unnecessary Equipment Updates

    This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.

    Expand Your Wireless Network Up to 328 ft.

    The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges.

    Simple Plug-and-Play Installation Has Your Device Connected in Minutes

    No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data.

    Designed for Installation Almost Anywhere

    Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

    3-Year Warranty and Environmentally Responsible Design

    The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility.


    PRODUCT SPECIFICATIONS
    Input Voltage
    • 120 V AC
    • 230 V AC
    Minimum Frequency 50 Hz
    Maximum Frequency 60 Hz
    Input Ports Ethernet
    Output Ports Ethernet
    Color Family Black
    Product Color Black
    Form Factor Desktop
    Mount Type Surface-mountable
    Package Contents
    • NPOE-30W-1G PoE Injector
    • Detachable C13 to NEMA 5-15P power cord, 6 ft.
    • Owner's manual
    • Green Initiatives
    Certifications & Standards
    • CE
    • FCC
    • UL
    IEEE Standards Supported
    • 803.3
    • 802.3ab
    • 802.3af
    • 802.3at
    • 802.3u

    Environmentally Friendly Yes
    Environmental Compliance
    • Restriction of Hazardous Substances (RoHS)
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    • Waste Electrical and Electronic Equipment Directive (WEEE)
    Country of Origin China
    Limited Warranty 3 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.