Tripp Lite by Eaton NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter - NPOE-SPL-G-5VMU - Signal Splitter, 5 V DC

  1. Home
  3. Tripp Lite by Eaton NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter - NPOE-SPL-G-5VMU - Signal Splitter, 5 V DC
NPOE-SPL-G-5VMU_Tripp Lite by Eaton NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
NPOE-SPL-G-5VMU_Tripp Lite by Eaton NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
NPOE-SPL-G-5VMU_Tripp Lite by Eaton NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
NPOE-SPL-G-5VMU_Tripp Lite by Eaton NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
NPOE-SPL-G-5VMU_Tripp Lite by Eaton NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter

Tripp Lite by Eaton NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter - NPOE-SPL-G-5VMU - Signal Splitter, 5 V DC

$19.32 $39.88
Availability:
Out of stock
Product type:
Signal Splitters/Amplifiers
Vendor:
Tripp Lite by Eaton
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Signal Splitter
  • Manufacturer Part Number: NPOE-SPL-G-5VMU
  • Input Voltage: 5 V DC

    • Marketing Information:

    Features

    Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks
    Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.

    Supports Power over Ethernet to Save You Money and Give You More Installation Choices
    This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.

    Simple Plug-and-Play Installation Has the Splitter Connected in Minutes
    No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.

    Typical Applications

    • Install an Alexa-enabled device or VoIP phone in an area without a standard power connection
    • Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN
    • Set up digital signage in a mall, arena, office building or theater
    • Connect security cameras and other A/V surveillance equipment in a video wall

    System Requirements

    • IEEE 802.3af/at-compliant PoE injector or switch
    • Existing or newly installed Cat5e/6/6a cabling
    • A network device with a 5V 1a USB Micro-B power port

    More from the Manufacturer

Product Specifications:
Product Features:
  • Manufacturer:Eaton Corporation
  • Manufacturer Part Number:NPOE-SPL-G-5VMU
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:NPOE-SPL-G-5VMU
  • Product Name:NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter

    • Marketing Information:

    Features

    Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks
    Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.

    Supports Power over Ethernet to Save You Money and Give You More Installation Choices
    This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.

    Simple Plug-and-Play Installation Has the Splitter Connected in Minutes
    No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.

    Typical Applications

    • Install an Alexa-enabled device or VoIP phone in an area without a standard power connection
    • Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN
    • Set up digital signage in a mall, arena, office building or theater
    • Connect security cameras and other A/V surveillance equipment in a video wall

    System Requirements

    • IEEE 802.3af/at-compliant PoE injector or switch
    • Existing or newly installed Cat5e/6/6a cabling
    • A network device with a 5V 1a USB Micro-B power port

    More from the Manufacturer


    PRODUCT SPECIFICATIONS
    Network (RJ-45) Yes
    USB Yes
    Number of Network (RJ-45) Ports 1
    Maximum Operating Distance 328 ft (99974.40 mm)
    Input Voltage 5 V DC
    Height 0.92" (23.37 mm)
    Width 3.18" (80.77 mm)
    Depth 1.11" (28.19 mm)
    Weight (Approximate) 1.76 oz (49.90 g)
    Package Contents
    • NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
    • Quick Start Guide
    Country of Origin China
    Environmentally Friendly Yes
    Limited Warranty 3 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Signal Splitter
    • Manufacturer Part Number: NPOE-SPL-G-5VMU
    • Input Voltage: 5 V DC

      • Marketing Information:

      Features

      Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks
      Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.

      Supports Power over Ethernet to Save You Money and Give You More Installation Choices
      This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.

      Simple Plug-and-Play Installation Has the Splitter Connected in Minutes
      No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.

      Typical Applications

      • Install an Alexa-enabled device or VoIP phone in an area without a standard power connection
      • Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN
      • Set up digital signage in a mall, arena, office building or theater
      • Connect security cameras and other A/V surveillance equipment in a video wall

      System Requirements

      • IEEE 802.3af/at-compliant PoE injector or switch
      • Existing or newly installed Cat5e/6/6a cabling
      • A network device with a 5V 1a USB Micro-B power port

      More from the Manufacturer

    Product Specifications:
    Product Features:
  • Manufacturer:Eaton Corporation
  • Manufacturer Part Number:NPOE-SPL-G-5VMU
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:NPOE-SPL-G-5VMU
  • Product Name:NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter

    • Marketing Information:

    Features

    Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks
    Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.

    Supports Power over Ethernet to Save You Money and Give You More Installation Choices
    This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.

    Simple Plug-and-Play Installation Has the Splitter Connected in Minutes
    No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.

    Typical Applications

    • Install an Alexa-enabled device or VoIP phone in an area without a standard power connection
    • Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN
    • Set up digital signage in a mall, arena, office building or theater
    • Connect security cameras and other A/V surveillance equipment in a video wall

    System Requirements

    • IEEE 802.3af/at-compliant PoE injector or switch
    • Existing or newly installed Cat5e/6/6a cabling
    • A network device with a 5V 1a USB Micro-B power port

    More from the Manufacturer


    PRODUCT SPECIFICATIONS
    Network (RJ-45) Yes
    USB Yes
    Number of Network (RJ-45) Ports 1
    Maximum Operating Distance 328 ft (99974.40 mm)
    Input Voltage 5 V DC
    Height 0.92" (23.37 mm)
    Width 3.18" (80.77 mm)
    Depth 1.11" (28.19 mm)
    Weight (Approximate) 1.76 oz (49.90 g)
    Package Contents
    • NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
    • Quick Start Guide
    Country of Origin China
    Environmentally Friendly Yes
    Limited Warranty 3 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.