Tripp Lite PDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet - PDUMH15ATNET - PDU, 120 V AC, 1U, 120 V AC, NEMA 5-15P

Tripp Lite PDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet - PDUMH15ATNET - PDU, 120 V AC, 1U, 120 V AC, NEMA 5-15P

$909.38 $1,877.28
Availability:
In stock
Product type:
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: PDU
  • Manufacturer Part Number: PDUMH15ATNET
  • Input Voltage: 120 V AC
  • Rack Height: 1U
  • Plug/Connector Type: NEMA 5-15P

  • Marketing Information: Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The built-in Java-free HTML5-based LX Platform interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP, BOOTP and NTP. Switched PDU features include individually controllable output receptacles. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

    More from the Manufacturer

Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:PDUMH15ATNET
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:PDUMH15ATNET
  • Product Name:PDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet

  • Marketing Information:Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The built-in Java-free HTML5-based LX Platform interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP, BOOTP and NTP. Switched PDU features include individually controllable output receptacles. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

    More from the Manufacturer


    PRODUCT SPECIFICATIONS
    PDU Type Switched
    Plug/Connector Type NEMA 5-15P
    Plug/Connector Detail 2 x NEMA 5-15P
    Receptacle Type NEMA 5-15R
    Receptacle Detail 8 x NEMA 5-15R
    Input Voltage 120 V AC
    Output Voltage 120 V AC
    Power Rating (VA) 1.80 kVA
    Management
    • Integrated Automatic Transfer Switch (ATS) allows PDU to operate from secondary input source when primary input fails
    • Sequential outlet power-on prevents inrush-related equipment interaction on startup
    • Programmable or real-time outlet power control via web/network monitoring and control card
    Product Color Black
    Mounting Orientation Vertical
    Mount Type Rack-mountable
    Rack Height 1U
    Height 1.75" (44.45 mm)
    Width 1.75" (44.45 mm)
    Depth 14.50" (368.30 mm)
    Weight (Approximate) 4.99 kg
    Package Contents
    • PDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet
    • PDU with attached 5-15P input power cord
    • Detachable C13 to NEMA 5-15P 12 ft/3.6m power cord for optional secondary input
    • User manuals with warranty information
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Limited Warranty 2 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: PDU
    • Manufacturer Part Number: PDUMH15ATNET
    • Input Voltage: 120 V AC
    • Rack Height: 1U
    • Plug/Connector Type: NEMA 5-15P

    • Marketing Information: Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The built-in Java-free HTML5-based LX Platform interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP, BOOTP and NTP. Switched PDU features include individually controllable output receptacles. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

      More from the Manufacturer

    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:PDUMH15ATNET
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:PDUMH15ATNET
  • Product Name:PDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet

  • Marketing Information:Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The built-in Java-free HTML5-based LX Platform interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP, BOOTP and NTP. Switched PDU features include individually controllable output receptacles. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

    More from the Manufacturer


    PRODUCT SPECIFICATIONS
    PDU Type Switched
    Plug/Connector Type NEMA 5-15P
    Plug/Connector Detail 2 x NEMA 5-15P
    Receptacle Type NEMA 5-15R
    Receptacle Detail 8 x NEMA 5-15R
    Input Voltage 120 V AC
    Output Voltage 120 V AC
    Power Rating (VA) 1.80 kVA
    Management
    • Integrated Automatic Transfer Switch (ATS) allows PDU to operate from secondary input source when primary input fails
    • Sequential outlet power-on prevents inrush-related equipment interaction on startup
    • Programmable or real-time outlet power control via web/network monitoring and control card
    Product Color Black
    Mounting Orientation Vertical
    Mount Type Rack-mountable
    Rack Height 1U
    Height 1.75" (44.45 mm)
    Width 1.75" (44.45 mm)
    Depth 14.50" (368.30 mm)
    Weight (Approximate) 4.99 kg
    Package Contents
    • PDUMH15ATNET PDU Switched ATS 120V 15A 8 Outlet
    • PDU with attached 5-15P input power cord
    • Detachable C13 to NEMA 5-15P 12 ft/3.6m power cord for optional secondary input
    • User manuals with warranty information
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Limited Warranty 2 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.