Tripp Lite by Eaton PINV2000HS Power Inverter - PINV2000HS - Power Inverter, 12 V DC, Pulse-width Modulated Sine Wave, 4 x NEMA 5-15/20R,2 x USB, 110 V AC,115 V AC,120 V AC,5 V DC, Terminal Block

Tripp Lite by Eaton PINV2000HS Power Inverter - PINV2000HS - Power Inverter, 12 V DC, Pulse-width Modulated Sine Wave, 4 x NEMA 5-15/20R,2 x USB, 110 V AC,115 V AC,120 V AC,5 V DC, Terminal Block

$877.27 $1,811.00
Availability:
Out of stock
Product type:
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Power Inverter
  • Manufacturer Part Number: PINV2000HS
  • Input Voltage: 12 V DC
  • Waveform Type: Pulse-width Modulated Sine Wave
  • Receptacles: 4 x NEMA 5-15/20R,2 x USB
  • Plug/Connector Type: Terminal Block
Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:PINV2000HS
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:PINV2000HS
  • Product Name:PINV2000HS Power Inverter

  • Marketing Information:

    Heavy-Duty Power Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle

    You don't have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 2000W mobile inverter converts 12V DC power from your car, truck, fleet vehicle, boat or RV's battery into standard 120V AC power. Just connect the included battery cables between the inverter's DC input terminals and the positive and negative terminals on your vehicle's battery.

    4 GFCI-Protected AC Outlets Provide Portable Power for Your Mobile Applications

    This power inverter provides a modified sine wave for use at remote locations, such as campgrounds, construction sites and mobile offices. Four NEMA 5-15/20R outlets deliver a continuous output of 2000 watts, a High Surge Mode that supports 3000 watts up to one hour, and a peak output of 4000 watts. That's plenty to operate a variety of appliances and power tools, such as low-power lights, camping accessories, battery rechargers for small battery-operated power tools, and mobile office equipment. All outlets have OSHA-compliant GFCI (Ground-Fault Circuit Interrupter) protection to shield you from electrical hazards due to excessive fault current.

    USB Charging Ports Keep Your Devices at Full Strength

    Two USB-A charging ports share 2 amps of charging capacity and remain active even when the inverter's on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop, MP3 player or GPS unit without draining too much power from the vehicle's battery.

    Includes the Latest Safety Features to Protect Your Equipment and Battery

    An on/off switch offers one-touch control over all AC outlets. If the power input from the vehicle's battery drops below 10 volts or exceeds 16 volts, the mobile power inverter will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature controlled fans begin cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions.

    Remote Control Panel Allows Power Control from 20 ft. Away

    A remote panel is included to extend on/off control over AC power output from a remote location. The wired panel connects to the PINV2000HS's RJ11 port and can be permanently installed inside your vehicle with user-supplied hardware. This allows you to mount the inverter somewhere out of sight, like inside a glove compartment or cabinet, and be able to operate it from your vehicle's dashboard. The panel's green LED confirms the inverter is powered on.

    Brackets Included for Permanent Mounting

    The heavy-duty power inverter's durable aluminum housing is designed to withstand the rigors of road trips, campouts, business trips and family vacations. Use the built-in mounting brackets and your own hardware to install the inverter permanently in a horizontal position.


    PRODUCT SPECIFICATIONS
    Plug/Connector Type Terminal Block
    Receptacles
    • 4 x NEMA 5-15/20R
    • 2 x USB
    Protection Type Overload Protection
    Input Voltage 12 V DC
    Output Voltage
    • 110 V AC
    • 115 V AC
    • 120 V AC
    • 5 V DC
    Maximum Frequency 60 Hz
    Peak Power Load 4 kW
    Continuous Power Load 2 kW
    Waveform Type Pulse-width Modulated Sine Wave
    Color Family White
    Product Color White
    Height 4.60" (116.84 mm)
    Width 10.47" (265.94 mm)
    Depth 14.41" (366.01 mm)
    Weight (Approximate) 5.12 kg
    Package Contents
    • PINV2000HS Power Inverter
    • PINVRM Wired Remote Panel w/20 ft. Cable
    • Battery Cable, Red/Black, 3 ft.
    • Grounding Cable, 3 ft.
    • Owner's Manual
    Certifications & Standards

    Tested for UL458: 2015 6th EDITION; CAN / CSA-C22.2 N�107.1: 2016 4th EDITION

    Country of Origin China
    Environmentally Friendly Yes
    Environmental Compliance Restriction of Hazardous Substances (RoHS)
    Limited Warranty 2 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Power Inverter
    • Manufacturer Part Number: PINV2000HS
    • Input Voltage: 12 V DC
    • Waveform Type: Pulse-width Modulated Sine Wave
    • Receptacles: 4 x NEMA 5-15/20R,2 x USB
    • Plug/Connector Type: Terminal Block
    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:PINV2000HS
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:PINV2000HS
  • Product Name:PINV2000HS Power Inverter

  • Marketing Information:

    Heavy-Duty Power Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle

    You don't have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 2000W mobile inverter converts 12V DC power from your car, truck, fleet vehicle, boat or RV's battery into standard 120V AC power. Just connect the included battery cables between the inverter's DC input terminals and the positive and negative terminals on your vehicle's battery.

    4 GFCI-Protected AC Outlets Provide Portable Power for Your Mobile Applications

    This power inverter provides a modified sine wave for use at remote locations, such as campgrounds, construction sites and mobile offices. Four NEMA 5-15/20R outlets deliver a continuous output of 2000 watts, a High Surge Mode that supports 3000 watts up to one hour, and a peak output of 4000 watts. That's plenty to operate a variety of appliances and power tools, such as low-power lights, camping accessories, battery rechargers for small battery-operated power tools, and mobile office equipment. All outlets have OSHA-compliant GFCI (Ground-Fault Circuit Interrupter) protection to shield you from electrical hazards due to excessive fault current.

    USB Charging Ports Keep Your Devices at Full Strength

    Two USB-A charging ports share 2 amps of charging capacity and remain active even when the inverter's on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop, MP3 player or GPS unit without draining too much power from the vehicle's battery.

    Includes the Latest Safety Features to Protect Your Equipment and Battery

    An on/off switch offers one-touch control over all AC outlets. If the power input from the vehicle's battery drops below 10 volts or exceeds 16 volts, the mobile power inverter will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature controlled fans begin cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions.

    Remote Control Panel Allows Power Control from 20 ft. Away

    A remote panel is included to extend on/off control over AC power output from a remote location. The wired panel connects to the PINV2000HS's RJ11 port and can be permanently installed inside your vehicle with user-supplied hardware. This allows you to mount the inverter somewhere out of sight, like inside a glove compartment or cabinet, and be able to operate it from your vehicle's dashboard. The panel's green LED confirms the inverter is powered on.

    Brackets Included for Permanent Mounting

    The heavy-duty power inverter's durable aluminum housing is designed to withstand the rigors of road trips, campouts, business trips and family vacations. Use the built-in mounting brackets and your own hardware to install the inverter permanently in a horizontal position.


    PRODUCT SPECIFICATIONS
    Plug/Connector Type Terminal Block
    Receptacles
    • 4 x NEMA 5-15/20R
    • 2 x USB
    Protection Type Overload Protection
    Input Voltage 12 V DC
    Output Voltage
    • 110 V AC
    • 115 V AC
    • 120 V AC
    • 5 V DC
    Maximum Frequency 60 Hz
    Peak Power Load 4 kW
    Continuous Power Load 2 kW
    Waveform Type Pulse-width Modulated Sine Wave
    Color Family White
    Product Color White
    Height 4.60" (116.84 mm)
    Width 10.47" (265.94 mm)
    Depth 14.41" (366.01 mm)
    Weight (Approximate) 5.12 kg
    Package Contents
    • PINV2000HS Power Inverter
    • PINVRM Wired Remote Panel w/20 ft. Cable
    • Battery Cable, Red/Black, 3 ft.
    • Grounding Cable, 3 ft.
    • Owner's Manual
    Certifications & Standards

    Tested for UL458: 2015 6th EDITION; CAN / CSA-C22.2 N�107.1: 2016 4th EDITION

    Country of Origin China
    Environmentally Friendly Yes
    Environmental Compliance Restriction of Hazardous Substances (RoHS)
    Limited Warranty 2 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.