Tripp Lite by Eaton PSSS2C Clamp Mount for Power Strip - Black - PSSS2C - Clamp Mount

  1. Home
  3. Tripp Lite by Eaton PSSS2C Clamp Mount for Power Strip - Black - PSSS2C - Clamp Mount
PSSS2C_Tripp Lite by Eaton PSSS2C Clamp Mount for Power Strip - Black
PSSS2C_Tripp Lite by Eaton PSSS2C Clamp Mount for Power Strip - Black
PSSS2C_Tripp Lite by Eaton PSSS2C Clamp Mount for Power Strip - Black
PSSS2C_Tripp Lite by Eaton PSSS2C Clamp Mount for Power Strip - Black
PSSS2C_Tripp Lite by Eaton PSSS2C Clamp Mount for Power Strip - Black

Tripp Lite by Eaton PSSS2C Clamp Mount for Power Strip - Black - PSSS2C - Clamp Mount

$19.90 $41.05
Availability:
Out of stock
Product type:
Mounting Kits
Vendor:
Tripp Lite by Eaton
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Clamp Mount
  • Manufacturer Part Number: PSSS2C

    • Marketing Information:

    Clamps have built-in clips to securely mount Tripp Lite PS- and SS-series bench-mount power strips without the need for drilling holes.

    C-Clamps Securely Mount Power Strips without Drilling
    Now it's possible to mount Tripp Lite PS- and SS-series bench-mount power strips without drilling into walls or workbenches. Sold in a pack of two, the PSSS2C C-clamps attach to the edge of a desk, table, workbench or other solid, flat surface up to 2.25 inches thick. Slide the clamps onto the edge of your surface, hand tighten the adjustment knobs to secure and then snap your power strip into the built-in mounting clips. For optimal support, use at least two clamps for power strips 36 inches and shorter. For power strips longer than 36 inches, use an additional clamp every 12 to 18 inches.

    Add Flexibility to Power Strip Installations
    The PSSS2C clamps are perfect for installations where drilling mounting holes is not possible or desirable. There are no mounting fasteners, so you can reposition the power strip installation quickly. The built-in mounting clips allow you to replace a power strip without removing the clamps from the mounting surface. Made of heavy-duty steel, the clamps withstand the rigors of daily use.

    Retrofit Existing Installations to Improve Access to Outlets
    You can change the mounting of a Tripp Lite power strip you already own to improve access to the outlets or to avoid drilling new holes when relocating the strip. The built-in mounting clips are designed for use with Tripp Lite PS- and SS-series bench-mount power strips. (Compatibility with other power strips depends on the strip's dimensions; the mounting clips are not adjustable.)

    More from the Manufacturer

Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:PSSS2C
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:PSSS2C
  • Product Name:PSSS2C Clamp Mount

    • Marketing Information:

    Clamps have built-in clips to securely mount Tripp Lite PS- and SS-series bench-mount power strips without the need for drilling holes.

    C-Clamps Securely Mount Power Strips without Drilling
    Now it's possible to mount Tripp Lite PS- and SS-series bench-mount power strips without drilling into walls or workbenches. Sold in a pack of two, the PSSS2C C-clamps attach to the edge of a desk, table, workbench or other solid, flat surface up to 2.25 inches thick. Slide the clamps onto the edge of your surface, hand tighten the adjustment knobs to secure and then snap your power strip into the built-in mounting clips. For optimal support, use at least two clamps for power strips 36 inches and shorter. For power strips longer than 36 inches, use an additional clamp every 12 to 18 inches.

    Add Flexibility to Power Strip Installations
    The PSSS2C clamps are perfect for installations where drilling mounting holes is not possible or desirable. There are no mounting fasteners, so you can reposition the power strip installation quickly. The built-in mounting clips allow you to replace a power strip without removing the clamps from the mounting surface. Made of heavy-duty steel, the clamps withstand the rigors of daily use.

    Retrofit Existing Installations to Improve Access to Outlets
    You can change the mounting of a Tripp Lite power strip you already own to improve access to the outlets or to avoid drilling new holes when relocating the strip. The built-in mounting clips are designed for use with Tripp Lite PS- and SS-series bench-mount power strips. (Compatibility with other power strips depends on the strip's dimensions; the mounting clips are not adjustable.)

    More from the Manufacturer



    PRODUCT SPECIFICATIONS
    Device Supported Power Strip
    Color Family Black
    Product Color Black
    Product Material Steel
    Height 4.80" (121.92 mm)
    Width 1.70" (43.18 mm)
    Depth 1.60" (40.64 mm)
    Weight (Approximate) 250 g
    Compatibility Tripp Lite Bench-mount Power Strip Series:
    • PS
    • SS
    Country of Origin China
    Limited Warranty Lifetime
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Clamp Mount
    • Manufacturer Part Number: PSSS2C

      • Marketing Information:

      Clamps have built-in clips to securely mount Tripp Lite PS- and SS-series bench-mount power strips without the need for drilling holes.

      C-Clamps Securely Mount Power Strips without Drilling
      Now it's possible to mount Tripp Lite PS- and SS-series bench-mount power strips without drilling into walls or workbenches. Sold in a pack of two, the PSSS2C C-clamps attach to the edge of a desk, table, workbench or other solid, flat surface up to 2.25 inches thick. Slide the clamps onto the edge of your surface, hand tighten the adjustment knobs to secure and then snap your power strip into the built-in mounting clips. For optimal support, use at least two clamps for power strips 36 inches and shorter. For power strips longer than 36 inches, use an additional clamp every 12 to 18 inches.

      Add Flexibility to Power Strip Installations
      The PSSS2C clamps are perfect for installations where drilling mounting holes is not possible or desirable. There are no mounting fasteners, so you can reposition the power strip installation quickly. The built-in mounting clips allow you to replace a power strip without removing the clamps from the mounting surface. Made of heavy-duty steel, the clamps withstand the rigors of daily use.

      Retrofit Existing Installations to Improve Access to Outlets
      You can change the mounting of a Tripp Lite power strip you already own to improve access to the outlets or to avoid drilling new holes when relocating the strip. The built-in mounting clips are designed for use with Tripp Lite PS- and SS-series bench-mount power strips. (Compatibility with other power strips depends on the strip's dimensions; the mounting clips are not adjustable.)

      More from the Manufacturer

    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:PSSS2C
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:PSSS2C
  • Product Name:PSSS2C Clamp Mount

    • Marketing Information:

    Clamps have built-in clips to securely mount Tripp Lite PS- and SS-series bench-mount power strips without the need for drilling holes.

    C-Clamps Securely Mount Power Strips without Drilling
    Now it's possible to mount Tripp Lite PS- and SS-series bench-mount power strips without drilling into walls or workbenches. Sold in a pack of two, the PSSS2C C-clamps attach to the edge of a desk, table, workbench or other solid, flat surface up to 2.25 inches thick. Slide the clamps onto the edge of your surface, hand tighten the adjustment knobs to secure and then snap your power strip into the built-in mounting clips. For optimal support, use at least two clamps for power strips 36 inches and shorter. For power strips longer than 36 inches, use an additional clamp every 12 to 18 inches.

    Add Flexibility to Power Strip Installations
    The PSSS2C clamps are perfect for installations where drilling mounting holes is not possible or desirable. There are no mounting fasteners, so you can reposition the power strip installation quickly. The built-in mounting clips allow you to replace a power strip without removing the clamps from the mounting surface. Made of heavy-duty steel, the clamps withstand the rigors of daily use.

    Retrofit Existing Installations to Improve Access to Outlets
    You can change the mounting of a Tripp Lite power strip you already own to improve access to the outlets or to avoid drilling new holes when relocating the strip. The built-in mounting clips are designed for use with Tripp Lite PS- and SS-series bench-mount power strips. (Compatibility with other power strips depends on the strip's dimensions; the mounting clips are not adjustable.)

    More from the Manufacturer



    PRODUCT SPECIFICATIONS
    Device Supported Power Strip
    Color Family Black
    Product Color Black
    Product Material Steel
    Height 4.80" (121.92 mm)
    Width 1.70" (43.18 mm)
    Depth 1.60" (40.64 mm)
    Weight (Approximate) 250 g
    Compatibility Tripp Lite Bench-mount Power Strip Series:
    • PS
    • SS
    Country of Origin China
    Limited Warranty Lifetime
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.