Tripp Lite by Eaton Receiver Unit - B160-100-DPSI - Video Extender Receiver, Wall Mountable,Rack-mountable,Pole-mountable

Tripp Lite by Eaton Receiver Unit - B160-100-DPSI - Video Extender Receiver, Wall Mountable,Rack-mountable,Pole-mountable

$200.84 $411.74
Availability:
Out of stock
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Video Extender Receiver
  • Manufacturer Part Number: B160-100-DPSI
  • Form Factor: Wall Mountable,Rack-mountable,Pole-mountable

  • Marketing Information:

    The B160-100-DPSI DisplayPort Audio/Video with RS-232 Serial and IR Control over IP Receiver extends and distributes DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch* located up to 328 feet (100 m) away. With an additional 328 feet between the switch and the transmitter (sold separately), the total maximum distance from source to display is 656 feet (200 m).

    The B160-100-DPSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.**

    The B160-100-DPSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. It works with any analog or digital source, including HDMI and VGA. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.

    Compatible with Tripp Lite's B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.


    *B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.

    **Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.

    Features

    Extends and Distributes DisplayPort A/V, Serial and IR Control Signals over Cat5/6 Cabling

    • Converts source video to IP-based signal transmitted to and distributed through network switch
    • Extends signal up to 328 ft. (100 m) from switch
    • Can also connect directly to transmitter up to 328 ft. away


    Designed for Managed Network Switches with IGMP

    • Allows login and remote management via switch interface
    • Works with any analog or digital source, including HDMI and VGA
    • Connect up to 64 transmitters and 255 receivers in single managed switch installation


    Enhanced Technical Features

    • Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
    • Uses H.264 video compression standard
    • Transmits on 20-60 kHz IR frequency
    • Extends IR control signals that control a source from a remote display
    • Supports RS-232 serial baud rates up to 57600 Bps
    • HDCP and 3D compatible when used with a DisplayPort or HDMI transmitter (not compatible with VGA transmitter)


    Plug and Play Functionality

    • No software or drivers required
    • Hardware included for mounting on wall, rack or pole
    • Compatible with B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B160-100-DPSI
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:B160-100-DPSI
  • Product Name:Receiver Unit

  • Marketing Information:

    The B160-100-DPSI DisplayPort Audio/Video with RS-232 Serial and IR Control over IP Receiver extends and distributes DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch* located up to 328 feet (100 m) away. With an additional 328 feet between the switch and the transmitter (sold separately), the total maximum distance from source to display is 656 feet (200 m).

    The B160-100-DPSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.**

    The B160-100-DPSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. It works with any analog or digital source, including HDMI and VGA. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.

    Compatible with Tripp Lite's B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.


    *B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.

    **Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.

    Features

    Extends and Distributes DisplayPort A/V, Serial and IR Control Signals over Cat5/6 Cabling

    • Converts source video to IP-based signal transmitted to and distributed through network switch
    • Extends signal up to 328 ft. (100 m) from switch
    • Can also connect directly to transmitter up to 328 ft. away


    Designed for Managed Network Switches with IGMP

    • Allows login and remote management via switch interface
    • Works with any analog or digital source, including HDMI and VGA
    • Connect up to 64 transmitters and 255 receivers in single managed switch installation


    Enhanced Technical Features

    • Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
    • Uses H.264 video compression standard
    • Transmits on 20-60 kHz IR frequency
    • Extends IR control signals that control a source from a remote display
    • Supports RS-232 serial baud rates up to 57600 Bps
    • HDCP and 3D compatible when used with a DisplayPort or HDMI transmitter (not compatible with VGA transmitter)


    Plug and Play Functionality

    • No software or drivers required
    • Hardware included for mounting on wall, rack or pole
    • Compatible with B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Output Devices Supported 1
    Maximum Operating Distance 656.17 ft (200000 mm)
    Graphics Modes Full HD
    Maximum Video Resolution 1920 x 1080
    Network (RJ-45) Yes
    DisplayPort Yes
    Number of Network (RJ-45) Ports 1
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Form Factor
    • Wall Mountable
    • Rack-mountable
    • Pole-mountable
    Package Contents
    • Receiver Unit
    • External Power Supply w/NEMA 1-15P plug (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
    • Plug Adapters for U.S., U.K., Europe and Australia
    • IR-In Cable
    • 3.5 mm to DB9 Adapter Cable (M/M)
    • Mounting Hardware
    • Owner's Manual
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Limited Warranty 1 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Video Extender Receiver
    • Manufacturer Part Number: B160-100-DPSI
    • Form Factor: Wall Mountable,Rack-mountable,Pole-mountable

    • Marketing Information:

      The B160-100-DPSI DisplayPort Audio/Video with RS-232 Serial and IR Control over IP Receiver extends and distributes DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch* located up to 328 feet (100 m) away. With an additional 328 feet between the switch and the transmitter (sold separately), the total maximum distance from source to display is 656 feet (200 m).

      The B160-100-DPSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.**

      The B160-100-DPSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. It works with any analog or digital source, including HDMI and VGA. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.

      Compatible with Tripp Lite's B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.


      *B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.

      **Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.

      Features

      Extends and Distributes DisplayPort A/V, Serial and IR Control Signals over Cat5/6 Cabling

      • Converts source video to IP-based signal transmitted to and distributed through network switch
      • Extends signal up to 328 ft. (100 m) from switch
      • Can also connect directly to transmitter up to 328 ft. away


      Designed for Managed Network Switches with IGMP

      • Allows login and remote management via switch interface
      • Works with any analog or digital source, including HDMI and VGA
      • Connect up to 64 transmitters and 255 receivers in single managed switch installation


      Enhanced Technical Features

      • Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
      • Uses H.264 video compression standard
      • Transmits on 20-60 kHz IR frequency
      • Extends IR control signals that control a source from a remote display
      • Supports RS-232 serial baud rates up to 57600 Bps
      • HDCP and 3D compatible when used with a DisplayPort or HDMI transmitter (not compatible with VGA transmitter)


      Plug and Play Functionality

      • No software or drivers required
      • Hardware included for mounting on wall, rack or pole
      • Compatible with B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters

      TAA-Compliant

      • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B160-100-DPSI
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Model:B160-100-DPSI
  • Product Name:Receiver Unit

  • Marketing Information:

    The B160-100-DPSI DisplayPort Audio/Video with RS-232 Serial and IR Control over IP Receiver extends and distributes DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch* located up to 328 feet (100 m) away. With an additional 328 feet between the switch and the transmitter (sold separately), the total maximum distance from source to display is 656 feet (200 m).

    The B160-100-DPSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.**

    The B160-100-DPSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. It works with any analog or digital source, including HDMI and VGA. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.

    Compatible with Tripp Lite's B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.


    *B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.

    **Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.

    Features

    Extends and Distributes DisplayPort A/V, Serial and IR Control Signals over Cat5/6 Cabling

    • Converts source video to IP-based signal transmitted to and distributed through network switch
    • Extends signal up to 328 ft. (100 m) from switch
    • Can also connect directly to transmitter up to 328 ft. away


    Designed for Managed Network Switches with IGMP

    • Allows login and remote management via switch interface
    • Works with any analog or digital source, including HDMI and VGA
    • Connect up to 64 transmitters and 255 receivers in single managed switch installation


    Enhanced Technical Features

    • Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
    • Uses H.264 video compression standard
    • Transmits on 20-60 kHz IR frequency
    • Extends IR control signals that control a source from a remote display
    • Supports RS-232 serial baud rates up to 57600 Bps
    • HDCP and 3D compatible when used with a DisplayPort or HDMI transmitter (not compatible with VGA transmitter)


    Plug and Play Functionality

    • No software or drivers required
    • Hardware included for mounting on wall, rack or pole
    • Compatible with B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Output Devices Supported 1
    Maximum Operating Distance 656.17 ft (200000 mm)
    Graphics Modes Full HD
    Maximum Video Resolution 1920 x 1080
    Network (RJ-45) Yes
    DisplayPort Yes
    Number of Network (RJ-45) Ports 1
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Form Factor
    • Wall Mountable
    • Rack-mountable
    • Pole-mountable
    Package Contents
    • Receiver Unit
    • External Power Supply w/NEMA 1-15P plug (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
    • Plug Adapters for U.S., U.K., Europe and Australia
    • IR-In Cable
    • 3.5 mm to DB9 Adapter Cable (M/M)
    • Mounting Hardware
    • Owner's Manual
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Limited Warranty 1 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.