Tripp Lite by Eaton SmartPro SMART1000RM1UN 1kVA Rack-mountable - SMART1000RM1UN - Line-interactive UPS, 120 V AC, Rack-mountable, 1U, 120 V AC, SmartPro, 4 Minute, 1 kVA/800 W

Tripp Lite by Eaton SmartPro SMART1000RM1UN 1kVA Rack-mountable - SMART1000RM1UN - Line-interactive UPS, 120 V AC, Rack-mountable, 1U, 120 V AC, SmartPro, 4 Minute, 1 kVA/800 W

$1,708.37 $3,526.65
Availability:
Out of stock
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Line-interactive UPS
  • Manufacturer Part Number: SMART1000RM1UN
  • Input Voltage: 120 V AC
  • Form Factor: Rack-mountable
  • Rack Height: 1U
  • Product Family: SmartPro
  • Backup/Run Time (Full Load): 4 Minute
  • Load Capacity: 1 kVA/800 W

  • Marketing Information:

    Protects Mission-Critical Rack-Mounted Equipment

    • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
    • Audible alarm signals loss of utility power, overload and low battery
    • 6 NEMA 5-15R outlets
    • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
    • 450-joule surge suppression rating
    Reliable Battery Backup
    • Supports half load up to 14 min. and full load up to 4 min.
    • Internal batteries designed for hot-swap field replacement
    Pre-Installed WEBCARDLX Network Interface
    • Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
    • Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
    Reduce Service Calls with Auto Probe Autonomous Device Management
    • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
    Switchable Outlets
    • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

    Automatic Voltage Regulation (AVR)

    • Maintains 120V nominal output over input range of 83V-147V without using battery power

    EMI/RFI Line Noise Filtering

    • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

    LED Indicators

    • Front-panel LEDs signal power, voltage correction, load level and battery charge state

    Communications Ports

    • USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
    • EPO port supports emergency shutdown in large facilities

    Versatile Installation Options

    • Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
    • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
    • Compatible with vertical mount cabinets

    More from the Manufacturer

Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:SMART1000RM1UN
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Line:SmartPro
  • Product Model:SMART1000RM1UN
  • Product Name:SmartPro SMART1000RM1UN 1kVA Rack-mountable

  • Marketing Information:

    Protects Mission-Critical Rack-Mounted Equipment

    • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
    • Audible alarm signals loss of utility power, overload and low battery
    • 6 NEMA 5-15R outlets
    • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
    • 450-joule surge suppression rating
    Reliable Battery Backup
    • Supports half load up to 14 min. and full load up to 4 min.
    • Internal batteries designed for hot-swap field replacement
    Pre-Installed WEBCARDLX Network Interface
    • Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
    • Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
    Reduce Service Calls with Auto Probe Autonomous Device Management
    • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
    Switchable Outlets
    • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

    Automatic Voltage Regulation (AVR)

    • Maintains 120V nominal output over input range of 83V-147V without using battery power

    EMI/RFI Line Noise Filtering

    • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

    LED Indicators

    • Front-panel LEDs signal power, voltage correction, load level and battery charge state

    Communications Ports

    • USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
    • EPO port supports emergency shutdown in large facilities

    Versatile Installation Options

    • Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
    • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
    • Compatible with vertical mount cabinets

    PRODUCT SPECIFICATIONS
    Receptacle Type NEMA 5-15R
    Receptacle Detail 6 x NEMA 5-15R
    Load Capacity (VA) 1 kVA
    Load Capacity (Watt) 800 W
    Input Voltage 120 V AC
    Output Voltage 120 V AC
    Backup/Run Time (Full Load) 4 Minute
    Height 1.70" (43.18 mm)
    Width 17.50" (444.50 mm)
    Depth 16.80" (426.72 mm)
    Rack Height 1U
    Form Factor Rack-mountable
    Weight (Approximate) 32 lb (14514.95584 g)
    Package Contents
    • SmartPro SMART1000RM1UN 1kVA Rack-mountable
    • Mounting Hardware
    • Cabling for USB & DB9 Monitoring and EPO Switching
    • PowerAlert Unattended Shutdown and UPS/Power Monitoring Software
    • Instruction Manual
    Country of Origin China
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance Restriction of Hazardous Substances (RoHS)
    Limited Warranty 3 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Line-interactive UPS
    • Manufacturer Part Number: SMART1000RM1UN
    • Input Voltage: 120 V AC
    • Form Factor: Rack-mountable
    • Rack Height: 1U
    • Product Family: SmartPro
    • Backup/Run Time (Full Load): 4 Minute
    • Load Capacity: 1 kVA/800 W

    • Marketing Information:

      Protects Mission-Critical Rack-Mounted Equipment

      • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
      • Audible alarm signals loss of utility power, overload and low battery
      • 6 NEMA 5-15R outlets
      • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
      • 450-joule surge suppression rating
      Reliable Battery Backup
      • Supports half load up to 14 min. and full load up to 4 min.
      • Internal batteries designed for hot-swap field replacement
      Pre-Installed WEBCARDLX Network Interface
      • Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
      • Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
      Reduce Service Calls with Auto Probe Autonomous Device Management
      • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
      Switchable Outlets
      • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

      Automatic Voltage Regulation (AVR)

      • Maintains 120V nominal output over input range of 83V-147V without using battery power

      EMI/RFI Line Noise Filtering

      • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

      LED Indicators

      • Front-panel LEDs signal power, voltage correction, load level and battery charge state

      Communications Ports

      • USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
      • EPO port supports emergency shutdown in large facilities

      Versatile Installation Options

      • Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
      • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
      • Compatible with vertical mount cabinets

      More from the Manufacturer

    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:SMART1000RM1UN
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Line:SmartPro
  • Product Model:SMART1000RM1UN
  • Product Name:SmartPro SMART1000RM1UN 1kVA Rack-mountable

  • Marketing Information:

    Protects Mission-Critical Rack-Mounted Equipment

    • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
    • Audible alarm signals loss of utility power, overload and low battery
    • 6 NEMA 5-15R outlets
    • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
    • 450-joule surge suppression rating
    Reliable Battery Backup
    • Supports half load up to 14 min. and full load up to 4 min.
    • Internal batteries designed for hot-swap field replacement
    Pre-Installed WEBCARDLX Network Interface
    • Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
    • Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
    Reduce Service Calls with Auto Probe Autonomous Device Management
    • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
    Switchable Outlets
    • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads

    Automatic Voltage Regulation (AVR)

    • Maintains 120V nominal output over input range of 83V-147V without using battery power

    EMI/RFI Line Noise Filtering

    • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

    LED Indicators

    • Front-panel LEDs signal power, voltage correction, load level and battery charge state

    Communications Ports

    • USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
    • EPO port supports emergency shutdown in large facilities

    Versatile Installation Options

    • Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
    • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
    • Compatible with vertical mount cabinets

    PRODUCT SPECIFICATIONS
    Receptacle Type NEMA 5-15R
    Receptacle Detail 6 x NEMA 5-15R
    Load Capacity (VA) 1 kVA
    Load Capacity (Watt) 800 W
    Input Voltage 120 V AC
    Output Voltage 120 V AC
    Backup/Run Time (Full Load) 4 Minute
    Height 1.70" (43.18 mm)
    Width 17.50" (444.50 mm)
    Depth 16.80" (426.72 mm)
    Rack Height 1U
    Form Factor Rack-mountable
    Weight (Approximate) 32 lb (14514.95584 g)
    Package Contents
    • SmartPro SMART1000RM1UN 1kVA Rack-mountable
    • Mounting Hardware
    • Cabling for USB & DB9 Monitoring and EPO Switching
    • PowerAlert Unattended Shutdown and UPS/Power Monitoring Software
    • Instruction Manual
    Country of Origin China
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance Restriction of Hazardous Substances (RoHS)
    Limited Warranty 3 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.