Tripp Lite SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS - SMART1000RM2UL - Line-interactive UPS, 120 V AC, Rack/Tower, Pure Sine Wave, 2U, 120 V AC, NEMA 5-15P, SmartPro, 20 Minute, 8.30 Minute, 1 kVA/800 W

Tripp Lite SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS - SMART1000RM2UL - Line-interactive UPS, 120 V AC, Rack/Tower, Pure Sine Wave, 2U, 120 V AC, NEMA 5-15P, SmartPro, 20 Minute, 8.30 Minute, 1 kVA/800 W

$1,940.93 $3,876.65
Availability:
Out of stock
Product type:
Vendor:
Product Features:
  • Brand: Tripp Lite
  • Product Type: Line-interactive UPS
  • Manufacturer Part Number: SMART1000RM2UL
  • Input Voltage: 120 V AC
  • Form Factor: Rack/Tower
  • Waveform Type: Pure Sine Wave
  • Rack Height: 2U
  • Plug/Connector Type: NEMA 5-15P
  • Product Family: SmartPro
  • Backup/Run Time (Half Load): 20 Minute
  • Backup/Run Time (Full Load): 8.30 Minute
  • Load Capacity: 1 kVA/800 W

  • Marketing Information:

    Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery

    This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.

    120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures

    The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown.

    Automatic Voltage Regulation (AVR) Conserves Battery Power

    With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed.

    6 Outlets Protect Your Mission-Critical Rack Equipment

    Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

    Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

    This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

    High Efficiency Helps the Environment and Your Cash Flow

    Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs.

    Advanced Communications Ports Connect to Any Workstation or Server

    USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency.

    Optional Network Management Cards Allow Detailed Monitoring of Conditions

    The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.

Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:SMART1000RM2UL
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite
  • Product Line:SmartPro
  • Product Model:SMART1000RM2UL
  • Product Name:SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS

  • Marketing Information:

    Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery

    This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.

    120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures

    The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown.

    Automatic Voltage Regulation (AVR) Conserves Battery Power

    With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed.

    6 Outlets Protect Your Mission-Critical Rack Equipment

    Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

    Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

    This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

    High Efficiency Helps the Environment and Your Cash Flow

    Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs.

    Advanced Communications Ports Connect to Any Workstation or Server

    USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency.

    Optional Network Management Cards Allow Detailed Monitoring of Conditions

    The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.


    PRODUCT SPECIFICATIONS
    AVR Yes
    Plug/Connector Type NEMA 5-15P
    Receptacle Type NEMA 5-15R
    Receptacle Detail 6 x NEMA 5-15R
    Transfer Time 4 ms
    EMI/RFI Noise Filter Yes
    Application/Usage
    • Server
    • Network
    • Telecommunication
    Load Capacity 1 kVA/800 W
    Input Voltage 120 V AC
    Input Voltage Range 83 V AC - 147 V AC
    Output Voltage 120 V AC
    Output Frequency 60 Hz
    Waveform Type Pure Sine Wave
    Surge Energy Rating 570 J
    Alarm
    • Power Failure
    • Low Battery
    • Overload
    • UPS Fault
    • Remote Shutdown
    Status Indicators
    • Multi-Function LCD
    • Audible Alarms
    Serial Port Yes
    EPO Port Yes
    USB (HID Compliant) Port Yes
    Battery Chemistry Lithium Iron Phosphate (LiFePO4)
    Backup/Run Time (Full Load) 8.30 Minute
    Backup/Run Time (Half Load) 20 Minute
    Typical Battery Recharge Time 2.70 Hour
    Storage Temperature 5°F (-15°C) - 122°F (50°C)
    Storage Relative Humidity 95%
    Maximum Operating Temperature 104°F (40°C)
    Sound Emission (A-Weighted) 45.5 dB(A)
    Thermal Dissipation 141 BTU/h
    Height 3.50" (88.90 mm)
    Width 17.35" (440.69 mm)
    Depth 12.50" (317.50 mm)
    Rack Height 2U
    Form Factor Rack/Tower
    Weight (Approximate) 7.39 kg
    Package Contents
    • SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS
    • USB Cable
    • DB9 Cable
    • EPO Cable
    • Rack-Mounting Hardware
    • Owner's Manual
    Environmentally Friendly Yes
    Country of Origin China
    Limited Warranty 5 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite
    • Product Type: Line-interactive UPS
    • Manufacturer Part Number: SMART1000RM2UL
    • Input Voltage: 120 V AC
    • Form Factor: Rack/Tower
    • Waveform Type: Pure Sine Wave
    • Rack Height: 2U
    • Plug/Connector Type: NEMA 5-15P
    • Product Family: SmartPro
    • Backup/Run Time (Half Load): 20 Minute
    • Backup/Run Time (Full Load): 8.30 Minute
    • Load Capacity: 1 kVA/800 W

    • Marketing Information:

      Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery

      This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.

      120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures

      The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown.

      Automatic Voltage Regulation (AVR) Conserves Battery Power

      With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed.

      6 Outlets Protect Your Mission-Critical Rack Equipment

      Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

      Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

      This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

      High Efficiency Helps the Environment and Your Cash Flow

      Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs.

      Advanced Communications Ports Connect to Any Workstation or Server

      USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency.

      Optional Network Management Cards Allow Detailed Monitoring of Conditions

      The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.

    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:SMART1000RM2UL
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite
  • Product Line:SmartPro
  • Product Model:SMART1000RM2UL
  • Product Name:SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS

  • Marketing Information:

    Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery

    This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.

    120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures

    The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown.

    Automatic Voltage Regulation (AVR) Conserves Battery Power

    With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed.

    6 Outlets Protect Your Mission-Critical Rack Equipment

    Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

    Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

    This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

    High Efficiency Helps the Environment and Your Cash Flow

    Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs.

    Advanced Communications Ports Connect to Any Workstation or Server

    USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency.

    Optional Network Management Cards Allow Detailed Monitoring of Conditions

    The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.


    PRODUCT SPECIFICATIONS
    AVR Yes
    Plug/Connector Type NEMA 5-15P
    Receptacle Type NEMA 5-15R
    Receptacle Detail 6 x NEMA 5-15R
    Transfer Time 4 ms
    EMI/RFI Noise Filter Yes
    Application/Usage
    • Server
    • Network
    • Telecommunication
    Load Capacity 1 kVA/800 W
    Input Voltage 120 V AC
    Input Voltage Range 83 V AC - 147 V AC
    Output Voltage 120 V AC
    Output Frequency 60 Hz
    Waveform Type Pure Sine Wave
    Surge Energy Rating 570 J
    Alarm
    • Power Failure
    • Low Battery
    • Overload
    • UPS Fault
    • Remote Shutdown
    Status Indicators
    • Multi-Function LCD
    • Audible Alarms
    Serial Port Yes
    EPO Port Yes
    USB (HID Compliant) Port Yes
    Battery Chemistry Lithium Iron Phosphate (LiFePO4)
    Backup/Run Time (Full Load) 8.30 Minute
    Backup/Run Time (Half Load) 20 Minute
    Typical Battery Recharge Time 2.70 Hour
    Storage Temperature 5°F (-15°C) - 122°F (50°C)
    Storage Relative Humidity 95%
    Maximum Operating Temperature 104°F (40°C)
    Sound Emission (A-Weighted) 45.5 dB(A)
    Thermal Dissipation 141 BTU/h
    Height 3.50" (88.90 mm)
    Width 17.35" (440.69 mm)
    Depth 12.50" (317.50 mm)
    Rack Height 2U
    Form Factor Rack/Tower
    Weight (Approximate) 7.39 kg
    Package Contents
    • SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS
    • USB Cable
    • DB9 Cable
    • EPO Cable
    • Rack-Mounting Hardware
    • Owner's Manual
    Environmentally Friendly Yes
    Country of Origin China
    Limited Warranty 5 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.