Tripp Lite by Eaton Video Extender Transmitter/Receiver - B127A-1A1-BDBH - Video Extender Transmitter/Receiver, Wall Mountable,Rack-mountable

Tripp Lite by Eaton Video Extender Transmitter/Receiver - B127A-1A1-BDBH - Video Extender Transmitter/Receiver, Wall Mountable,Rack-mountable

$287.03 $588.43
Availability:
Out of stock
Product Features:
  • Brand: Tripp Lite by Eaton
  • Product Type: Video Extender Transmitter/Receiver
  • Manufacturer Part Number: B127A-1A1-BDBH
  • Form Factor: Wall Mountable,Rack-mountable

  • Marketing Information:

    Features

    DisplayPort to HDMI Extender Kit Ideal for Digital Signage in Schools and Lecture Halls
    This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

    Extends a 4K A/V Transmission up to 230 ft.
    The B127A-1A1-BDBH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.

    Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
    The B127A-1A1-BDBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

    Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
    To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

    Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
    After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet.

    Dip Switch Extends Your Choice of Either USB or IR.
    The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.

    Plug-and-Play Operation for Quick Setup and Immediate Use
    The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite's P580-Series). Then connect the receiver to the display with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).

    TAA-Compliant for GSA Schedule Purchases
    The B127A-1A1-BDBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

    Typical Applications

    • Connect a laptop for a video or PowerPoint presentation in an auditorium or lecture hall, where the source device changes frequently
Product Specifications:
Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B127A-1A1-BDBH
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Name:Video Extender Transmitter/Receiver

  • Marketing Information:

    Features

    DisplayPort to HDMI Extender Kit Ideal for Digital Signage in Schools and Lecture Halls
    This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

    Extends a 4K A/V Transmission up to 230 ft.
    The B127A-1A1-BDBH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.

    Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
    The B127A-1A1-BDBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

    Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
    To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

    Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
    After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet.

    Dip Switch Extends Your Choice of Either USB or IR.
    The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.

    Plug-and-Play Operation for Quick Setup and Immediate Use
    The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite's P580-Series). Then connect the receiver to the display with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).

    TAA-Compliant for GSA Schedule Purchases
    The B127A-1A1-BDBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

    Typical Applications

    • Connect a laptop for a video or PowerPoint presentation in an auditorium or lecture hall, where the source device changes frequently

    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Input Devices Supported 2
    Number of Output Devices Supported 2
    Maximum Operating Distance 230 ft (70104 mm)
    Graphics Modes 4K UHD
    Maximum Video Resolution 3840 x 2160
    Network (RJ-45) Yes
    HDMI In Yes
    HDMI Out Yes
    USB Yes
    Number of Network (RJ-45) Ports 2
    Number of USB Ports 3
    Number of HDMI Inputs 1
    Number of HDMI Outputs 1
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Transmitter Height 1.06" (27 mm)
    Transmitter Width 4.53" (115 mm)
    Transmitter Depth 2.46" (62.40 mm)
    Receiver Height 1.06" (27 mm)
    Receiver Width 4.53" (115 mm)
    Receiver Depth 2.46" (62.40 mm)
    Form Factor
    • Wall Mountable
    • Rack-mountable
    Transmitter Weight (Approximate) 453.6 g
    Receiver Weight (Approximate) 453.6 g
    Package Contents
    • 1 x Transmitter
    • 1 x Receiver
    • External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A)
    • 4 x International Plug Adapters (North America, Europe, U.K. and Australia)
    • Mounting Hardware
    • Owner's Manual
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance
    • Restriction of Hazardous Substances (RoHS)
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    Limited Warranty 1 Year
    Stay ON Forever

    Protects Your Device From Power Outage & Blackout

    Express Shipping

    Canada Wide Discounted Shipping

    OEM Standard

    Long Lasting Powerful Batteries with 1 year warranty

    Hassle Free Returns

    Request RMA and Get Refunded Within 3 Days

    Technical Support

    Get Free Technical Support & Installation Guide

    Technical Support

    Get Free Technical Support & Installation Guide

    Product Features:
    • Brand: Tripp Lite by Eaton
    • Product Type: Video Extender Transmitter/Receiver
    • Manufacturer Part Number: B127A-1A1-BDBH
    • Form Factor: Wall Mountable,Rack-mountable

    • Marketing Information:

      Features

      DisplayPort to HDMI Extender Kit Ideal for Digital Signage in Schools and Lecture Halls
      This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

      Extends a 4K A/V Transmission up to 230 ft.
      The B127A-1A1-BDBH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.

      Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
      The B127A-1A1-BDBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

      Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
      To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

      Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
      After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet.

      Dip Switch Extends Your Choice of Either USB or IR.
      The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.

      Plug-and-Play Operation for Quick Setup and Immediate Use
      The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite's P580-Series). Then connect the receiver to the display with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).

      TAA-Compliant for GSA Schedule Purchases
      The B127A-1A1-BDBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

      Typical Applications

      • Connect a laptop for a video or PowerPoint presentation in an auditorium or lecture hall, where the source device changes frequently
    Product Specifications:
    Product Features:
  • Manufacturer:Tripp Lite by Eaton
  • Manufacturer Part Number:B127A-1A1-BDBH
  • Manufacturer Website Address:https://tripplite.eaton.com/
  • Brand Name:Tripp Lite by Eaton
  • Product Name:Video Extender Transmitter/Receiver

  • Marketing Information:

    Features

    DisplayPort to HDMI Extender Kit Ideal for Digital Signage in Schools and Lecture Halls
    This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

    Extends a 4K A/V Transmission up to 230 ft.
    The B127A-1A1-BDBH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.

    Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
    The B127A-1A1-BDBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

    Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
    To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

    Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
    After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet.

    Dip Switch Extends Your Choice of Either USB or IR.
    The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.

    Plug-and-Play Operation for Quick Setup and Immediate Use
    The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite's P580-Series). Then connect the receiver to the display with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).

    TAA-Compliant for GSA Schedule Purchases
    The B127A-1A1-BDBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

    Typical Applications

    • Connect a laptop for a video or PowerPoint presentation in an auditorium or lecture hall, where the source device changes frequently

    PRODUCT SPECIFICATIONS
    Connectivity Technology Wired
    Number of Input Devices Supported 2
    Number of Output Devices Supported 2
    Maximum Operating Distance 230 ft (70104 mm)
    Graphics Modes 4K UHD
    Maximum Video Resolution 3840 x 2160
    Network (RJ-45) Yes
    HDMI In Yes
    HDMI Out Yes
    USB Yes
    Number of Network (RJ-45) Ports 2
    Number of USB Ports 3
    Number of HDMI Inputs 1
    Number of HDMI Outputs 1
    Media Type Supported Twisted Pair
    Twisted Pair Cable Standard Category 6
    Transmitter Height 1.06" (27 mm)
    Transmitter Width 4.53" (115 mm)
    Transmitter Depth 2.46" (62.40 mm)
    Receiver Height 1.06" (27 mm)
    Receiver Width 4.53" (115 mm)
    Receiver Depth 2.46" (62.40 mm)
    Form Factor
    • Wall Mountable
    • Rack-mountable
    Transmitter Weight (Approximate) 453.6 g
    Receiver Weight (Approximate) 453.6 g
    Package Contents
    • 1 x Transmitter
    • 1 x Receiver
    • External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A)
    • 4 x International Plug Adapters (North America, Europe, U.K. and Australia)
    • Mounting Hardware
    • Owner's Manual
    Country of Origin Taiwan
    TAA Compliant Yes
    Environmentally Friendly Yes
    Environmental Compliance
    • Restriction of Hazardous Substances (RoHS)
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    Limited Warranty 1 Year
    Here is the Manual Guide

    ORDER PROCESSING

    We ship from Toronto to Worldwide.
    We process orders within 1-2 business days (excluding weekends and holidays).
    Pre-ordered items are processed within 2-3 business days of arrival in stock.

    Successfully placed orders will receive an e-mail confirmation with the order details.
    If you do not receive an e-mail, please check your spam filter or contact us for confirmation.

    If you need any assistance with your order, please contact us immediately at support@upsandbattery.com. We will not be able to make changes to your order after it has shipped.

    Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.

    Your credit card information is safe with us. We accept most major credit, debit, and prepaid cards, including Visa, MasterCard, American Express, Discover, JCB, and Diners Club International, PayPal, Google Pay and Apple Pay.