Refurbished PDU

- Brand: APC by Schneider Electric
- Product Type: PDU
- Manufacturer Part Number: AP8830
- Input Voltage: 120 V AC
- Rack Height: 0U
- Plug/Connector Type: NEMA L5-20P
- Product Family: Metered Rack
Marketing Information: APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
-
PDU Type: MeteredPlug/Connector Type: NEMA L5-20PPlug/Connector Detail: 1 x NEMA L5-20PReceptacle Type: NEMA 5-20RReceptacle Detail: 24 x NEMA 5-20RInput Voltage: 120 V ACOutput Voltage:
- 100 V AC
- 120 V AC
- Metered Rack PDU
- Installation guide
- Rack mounting brackets
- Safety guide
- Serial configuration cable Environmentally Friendly: YesEnvironmental Certification:
- RoHS
- REACH

- Brand: APC by Schneider Electric
- Product Type: PDU
- Manufacturer Part Number: AP7802B
- Input Voltage: 120 V AC
- Rack Height: 2U
- Plug/Connector Type: NEMA L5-30P
- Product Family: Metered Rack
Marketing Information: Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.
-
PDU Type: MeteredPlug/Connector Type: NEMA L5-30PReceptacle Type: NEMA 5-20RReceptacle Detail: 16 x NEMA 5-20RProtection Type: Overload ProtectionInput Voltage: 120 V ACOutput Voltage: 120 V ACInput Current: 30 AMount Type: Rack-mountableRack Height: 2UHeight: 3.46" (88 mm)Width: 17.48" (444 mm)Depth: 4.41" (112 mm)Weight (Approximate): 3.36 kgPackage Contents:
- Rack PDU, Metered, 2U, 30A, 120V, (16) 5-20
- Cord retention bracket(s)
- Installation guide
- Rack mounting brackets
- User manual Environmentally Friendly: YesEnvironmental Certification:
- RoHS
- REACH

- Power Device: AC 120 V
- Power Device: AC 120 V Networking: Ethernet, RS-232
- Expansion / Connectivity: 1 x management (RS-232) - RJ-11
- Miscellaneous: 2 x power cable - integrated - 0.1 in
APC Rack Automatic Transfer Switch - Redundant switch (rack-mountable) - AC 120 V - Ethernet, RS-232 - output connectors: 16 - 2U - black
Product Specifications
General | |
---|---|
Device Type | Redundant switch - rack-mountable |
Height (Rack Units) | 2U |
Color | Black |
Power Device | |
---|---|
Input Voltage | AC 120 V |
Frequency Required | 50/60 Hz |
Input Connectors | 2 x power NEMA L5-30 |
Power Output Connectors Details | 16 x power NEMA 5-20 |
Output Voltage | AC 120 V |
Max Electric Current | 30 A |
Networking | |
---|---|
Remote Management Interface | Ethernet, RS-232 |
Remote Management Protocol | SNMP 1, SNMP, Telnet, SNMP 3, HTTP, HTTPS, SSH |
Expansion / Connectivity | |
---|---|
Interfaces | 1 x management (RS-232) - RJ-11 | 1 x LAN - RJ-45 |
Miscellaneous | |
---|---|
Cables Included | 2 x power cable - integrated - 0.1 in |
Rack Mounting Kit | Included |
Compliant Standards | EN55022 Class A, RoHS Exemption 7b, FCC Part 15 A |
Manufacturer Warranty | |
---|---|
Service & Support | Limited warranty - 2 years |
Environmental Parameters | |
---|---|
Min Operating Temperature | 23 °F |
Max Operating Temperature | 113 °F |
Humidity Range Operating | 0 - 95% |
Dimensions & Weight | |
---|---|
Width | 17 in |
Depth | 9.3 in |
Height | 3.5 in |
Weight | 13.89 lbs |
Dimensions & Weight (Shipping) | |
---|---|
Shipping Width | 24.1 in |
Shipping Depth | 14 in |
Shipping Height | 7.2 in |
Shipping Weight | 18.52 lbs |
- Rack Height 1U
- Output Connections (12) IEC 60320 C13
- Nominal Input Voltage 200V, 208V, 230V
- Input Connections IEC 60320 C14
APC Smart UPS 750 VA, 750 VA, 500 W, 340 J, Sealed Lead Acid (VRLA), 4.8 min, 16.4 min
Â
Output
Input
Physical
Environmental
Conformance

- Brand: APC by Schneider Electric
- Product Type: PDU
- Manufacturer Part Number: AP7584
- Input Voltage: 120 V AC,230 V AC
- Rack Height: 2U
- Plug/Connector Type: NEMA L14-30P
- Product Family: Basic Rack
Marketing Information:
Basic Rack 4.99kVA Extender PDU which allow users to distribute power outlets to rack-mount equipment with single input power source. APC now offers Basic Rack PDUs that mount veritcally, without tools in the rear channel of a NetShelter VX.
-
PDU Type: BasicPlug/Connector Type: NEMA L14-30PReceptacle Type: NEMA L6-30RReceptacle Detail: 4 x NEMA L6-30RInput Voltage:
- 120 V AC
- 230 V AC
- Basic Rack 4.992kVA Extender PDU
- Installation guide
- Rack mounting brackets Limited Warranty: 2 Year

- Brand: APC by Schneider Electric
- Product Type: PDU
- Manufacturer Part Number: AP7580
- Input Voltage: 230 V AC
- Rack Height: 2U
- Plug/Connector Type: NEMA L14-30P
- Product Family: Basic Rack
Marketing Information:
Basic Rack 4.99kVA PDU which allow users to distribute power outlets to rack-mount equipment with single input power source. APC now offers Basic Rack PDUs that mount veritcally, without tools in the rear channel of a NetShelter VX.
-
PDU Type: BasicPlug/Connector Type: NEMA L14-30PReceptacle Type: NEMA L5-20RReceptacle Detail: 4 x NEMA L5-20RInput Voltage: 230 V ACOutput Voltage: 120 V ACPower Rating (VA): 4.99 kVAProduct Color: BlackMount Type: Rack-mountableRack Height: 2UHeight: 3.50" (88.90 mm)Width: 17.20" (436.88 mm)Depth: 3.50" (88.90 mm)Weight (Approximate): 6.35 kgPackage Contents:
- Basic Rack 4.992kVA PDU
- Installation guide
- Rack mounting brackets Limited Warranty: 2 Year

- Brand: APC by Schneider Electric
- Product Type: PDU
- Manufacturer Part Number: AP7562
- Input Voltage: 120 V AC,230 V AC
- Plug/Connector Type: NEMA L21-20 (3PH)
- Product Family: Basic Rack
Marketing Information:
Basic Rack 5.7kVA PDU which allow users to distribute power outlets to rack-mount equipment with Multi-branch power input and with low cost power distribution. APC now offers Basic Rack PDU that mount veritcally, without tools in the rear channel of a NetShelter VX.
-
PDU Type: BasicPlug/Connector Type: NEMA L21-20 (3PH)Receptacle Type: NEMA 5-20RReceptacle Detail: 42 x NEMA 5-20RInput Voltage:
- 120 V AC
- 230 V AC
- Basic Rack 5.7kVA PDU
- Installation guide
- Rack mounting brackets
- Toolless mounting kit Limited Warranty: 2 Year

- Brand: APC by Schneider Electric
- Product Type: PDU
- Manufacturer Part Number: AP7541
- Input Voltage: 230 V AC
- Plug/Connector Type: NEMA L6-30P
- Product Family: Basic Rack
Marketing Information:
Basic Rack 4.992kVA PDU for Power distribution for rack-mount equipment with Single input power source. It allow users to distribute power outlets to rack-mount equipment. This PDU mount veritcally, without tools in the rear channel of a NetShelter VX.
-
PDU Type: BasicPlug/Connector Type: NEMA L6-30PReceptacle Type:
- IEC 60320 C13
- IEC 60320 C19
- 20 x IEC 60320 C13
- 4 x IEC 60320 C19
- 200 V AC
- 208 V AC
- Basic Rack 4.992kVA PDU
- Installation guide
- Rack mounting brackets
- Toolless mounting kit Limited Warranty: 2 Year

- Brand: APC by Schneider Electric
- Product Type: PDU
- Manufacturer Part Number: AP7540
- Input Voltage: 230 V AC
- Plug/Connector Type: NEMA L6-20P
- Product Family: Basic Rack
Marketing Information:
Basic Rack 4160VA PDU for Power distribution for rack-mount equipment. It allow users to distribute power outlets to rack-mount equipment. This PDU mount veritcally, without tools in the rear channel of a NetShelter VX.
-
PDU Type: BasicPlug/Connector Type: NEMA L6-20PReceptacle Type:
- IEC 60320 C13
- IEC 60320 C19
- 20 x IEC 60320 C13
- 4 x IEC 60320 C19
- Basic Rack 4160VA PDU
- Installation guide
- Rack mounting brackets
- Toolless mounting kit Limited Warranty: 2 Year